NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Replicate
220 Topics
Replicate issues STILL....
I have 2 readynas usnits runnig the latets firmware and they (after sorting out a p2p issue) backed up fine locally and now I have one unit offsite the backups are failing. Any advice please as I am tearing my hair out with these units. Log file is below. 2016-10-28 00:00:09 Job updated from server 2016-10-28 00:00:09 Replicate version: 1.3.0 build R2 2016-10-28 00:00:09 Starting backup job "FULL DAILY BACKUP" 2016-10-28 00:00:09 Locking target folder: /data/BACKUPS/FULL DAILY BACKUP 2016-10-28 00:00:13 Resume folder is "/data/BACKUPS/FULL DAILY BACKUP/2016-10-27 16-43 (failed)/data" 2016-10-28 00:01:05 p2p connect to nas-F6-0D-B0 in 12133640 network 2016-10-28 00:01:12 Connection method: 0 2016-10-28 00:01:12 LAN connection not available 2016-10-28 00:01:12 Using p2p connection 2016-10-28 00:01:12 Initializing source device 2016-10-28 00:01:12 Sending task to source device 2016-10-28 00:01:24 Awaiting task report 2016-10-28 00:01:29 Received success report 2016-10-28 00:01:29 Device initialization finished 2016-10-28 00:01:29 Copy in progress 2016-10-28 00:21:43 Copy failed 2016-10-28 00:21:43 Rotate backups (10) 2016-10-28 00:21:43 Rotation marker is "2016-10-20 00-00" 2016-10-28 00:22:20 Deinitialize source device 2016-10-28 00:22:20 Sending task to source device 2016-10-28 00:22:27 Awaiting task report 2016-10-28 00:22:34 Received success report 2016-10-28 00:22:34 Device deinitialization finished 2016-10-28 00:22:34 p2p disconnect with nas-F6-0D-B0 in 12133640 network 2016-10-28 00:22:35 Unlock target folder: /data/BACKUPS/FULL DAILY BACKUP 2016-10-28 00:22:35 Job finished
The option "keep existing files" deleted my whole NAS 2.5TB!
I just bought another (already have one up and running) ReadyNAS Ultra 4 with 4 HD's of 2TB each + 2 Replicate licenses for the purpose of backing up my first NAS which has the same specs. On the first NAS I had 2.5TB of precious buisiness related data stored. I installed replicate on both of them and it all started out fine. Before I set things up for real I wanted to test some backup/restore jobs just to get the hang of how it worked. So I made a small data backup of one simple folder on the first NAS and this went all fine. I made a few changes to the source folder and ran the backup job to see how the different versions ended up on the target NAS. Then I tested to restore this folder a couple of times from different versions without any problems. Then I noticed this damn option in the data restore interface, "keep existing files", which is ticked by default. I tried to find any information on what this option was for and how it worked in detail, but couldn't find anything in the latest manual or on this forum! Those first couple of restores made me a bit confused on how replicate really handled files during its restore procedure. So I thought that I would try a restore with that option un-checked to see if I could make more sense. As the backup job was a data backup (meaning I did chose a specific folder) and NOT a system backup, I was convinced this option ONLY INVOLVED files that was in the actual data backup job (in other words, only affect files and folders inside the chosen folder for the data backup). So I ran this restore and it started but got stuck on its initial "calculating"-state for a couple of minutes and finally I canceled the restore thinking something went wrong. I totally freaked out when I saw that EVERYTHING EXCEPT that tiny folder I was playing with WAS GONE on my first NAS!!!!!!! This god forsaken option turned out to have everything to do with data outside of the actual folder that the data backup job was intended for! Why the he** would anyone want to have an option for data based restores that wipes out all existing data OUTSIDE of the specified folder on the entire target NAS!!!!!!!!!???????????? Even if there where some strange situation when one would want this, IT SHOULD BE CRYSTAL CLEAR for the user that this option affects data outside of the folder specified in the data backup job. A simple warning message would have saved 10 years worth of business data! This option should be renamed to "Keep existing files OUTSIDE of the chosen folder" or even better "Delete the entire target NAS before restoring this data job" (that would also have saved my data). So I want to shout out a big WARNING to every one here, so you don't make my mistake! I doubt there is any jedi mind tricks to get my data back?? :cry:ReadyNAS Replicate Connect error code: -50
Sorry for my bad translation. Hello. for a while I am getting an error code [2015-09-19 11:04:56] [Error] Unable to connect to nas-F6-53-BA_ [2015-09-19 11:04:56] [Error] Connect error code: -50 Why not get to find out why. Can someone help me out? Thank you.
Planning to use Replicate
Greetings, I currently have a ReadyNAS 516 and I'm planning to setup Replicate. With that said, I need to purchase the ReadyNAS that will be stored off site and replicated too. What are the guidelines to use Replicate? Just OS6 or newer? Or does it have to be the exact same device? Can I buy something less expensive? Thanks in advance Cheers, Nick
Failed backups again
2x ReadyNAS Pro4 - One local, one offsite (which is a pain to get access to!) All 4 replicate jobs have been running perfect for months after moving the start times around to get around timeouts in the middle of the night from Time Warner. The guy who lives with the offsite NAS had to shut it down for a little bit, so he used the front panel to do a standard shut down. After rebooting, now all backups are failing. The stupid thing is that it says it can't find the NAS1 which is the local one. When I go to the Replicate website, I can SEE both units, NAS1 & NAS2 and browse their contents. But all backups are failing now. Log: [2013-10-05 06:00:01] [Info] Job updated from server [2013-10-05 06:00:01] [Info] Starting backup job "FS_FULL_QTRLY [2012-11-06 01:05 AM]" [2013-10-05 06:00:01] [Info] Replicate addon version: 1.1.5 build R1 [2013-10-05 06:00:01] [Info] Locking target folder: /c/backup/FS_FULL_BUP_TEST/FS_FULL_QTRLY [2012-11-06 01:05 AM] [2013-10-05 06:00:02] [Info] Resume source is "/c/backup/FS_FULL_BUP_TEST/FS_FULL_QTRLY [2012-11-06 01:05 AM]/2013-09-28 06-03 (failed)/data" [2013-10-05 06:00:07] [Info] p2p connect to AndtechNAS1 in 1022427 network [2013-10-05 06:00:07] [Error] Unable to connect to AndtechNAS1 [2013-10-05 06:00:07] [Error] Connect error code: -501 [2013-10-05 06:00:07] [Error] Please check the network connection between devices [2013-10-05 06:00:07] [Info] Rotate backups (1) [2013-10-05 06:00:07] [Info] Rotation marker is "2013-09-28 06-03 (failed)" [2013-10-05 06:00:07] [Info] Unlock target folder: /c/backup/FS_FULL_BUP_TEST/FS_FULL_QTRLY [2012-11-06 01:05 AM] [2013-10-05 06:00:07] [Info] Job finished
Replicate on a 3200
I have purchased a 516 and I want to replicate from a 3200 onto it so that I can reformat the 3200 to get advantage of the larger drives that have been fitted. Replicate installed fine on the 516 (and co-incidentally on my ReadyNAS Pro) but when I go to install the app on the 3200 it says that there is a name conflict. I have followed the threads and keep ending up in ReadyNas remote main screen and cannot find what is said to be "in the bottom right hand corner". Can somebody advise what I am doing wrong please (I don't have p2p installed/running as far as I know). Thanks in advance - TerryConnect error code: -300
[2013-04-10 13:54:28] [Info] Starting backup job "GlenshielRd_NAS" [2013-04-10 13:54:28] [Info] Replicate addon version: 1.1.6 build R1 [2013-04-10 13:54:28] [Info] Locking target folder: /c/GlenshielRd_Remote/GlenshielRd_NAS [2013-04-10 13:54:30] [Info] Resume source is "/c/GlenshielRd_Remote/GlenshielRd_NAS/2013-04-10 13-33 (failed)/data" [2013-04-10 13:55:43] [Info] p2p connect to GlenshielRd_NAS in 1351933 network [2013-04-10 13:56:42] [Info] p2p connect to GlenshielRd_NAS in 1351933 network [2013-04-10 13:57:43] [Error] Unable to connect to GlenshielRd_NAS [2013-04-10 13:57:43] [Error] Connect error code: -300 [2013-04-10 13:57:43] [Info] Rotate backups (7) [2013-04-10 13:57:43] [Info] Rotation marker is "2013-04-09 05-51" [2013-04-10 13:58:13] [Info] Unlock target folder: /c/GlenshielRd_Remote/GlenshielRd_NAS [2013-04-10 13:58:13] [Info] Job finished I have 2 units at different sites and they replicate folders to each other via 2 replication jobs across the internet, both of them randomly come up with error -300. What does error 300 mean? Model: ReadyNAS Duo v2 OS: RAIDiator - arm Version: 5.3.7 Replicate Version: 1.1.6 build R1Is it still possible to install the Replicate add-on for a RN2100?
Hey now! I am having an issue with a ReadyNas 2100 that refuses to show any apps under the 'Add-ons' section under 'Available'? I know support has been discontinued, does this mean after a factory default, I am unable to grab Replicate add-on? Here is the message I get when I click 'Available': The available add-ons cannot be displayed as the server cannot be contacted. Is it possible to install this manually with a package file of some sort? Thanks guys, I know I'm late the Replicate party...Solved
Solved - Unable to select backup folders
Hi, I have two ReadyNAS Duo v2's and One RN10200. They are all visible in ReadyNAS Replicate. I am trying to set up Data Backup jobs but, I am unable to select either source or destination folders on the devices. This as far as I can get; I don't have any problems accessing the ReadyNAS's normally, other than that the RN10200 is slower to appear in Windows Explorer. All are connected to the same router a Netgear R6250 as is the computer. Can anyone through any light on this problem?
