NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
GSM7324 Factory Reset
I have obtained a used GSM7324 for some lab work and need to reset to factory default. I have followed some guides power down ... reset button for 10secs.....power on power down ... reset button for 10secs.....keep pressed power on hold for a further 20 secs. Neither has worked. Any advice please I don't have access to PC/Laptop with serial port so cannot use any console connection. Thanks for any adviceGSM7328Sv2 - Factory reset
Wondering if someone can help, we have had this switch for a while and it has been sat in storage for some time. We no longer know the IP of the switch, what subnet it was on etc. After powering it on and letting it boot up, I connect a machine to it and cannot connect to the management interface. It just doesn't want to play ball! If I can get onto the switch and configure its IP, I will install this at one of our other sites, but at the moment I am having some real difficulty getting its IP. I have tried using the Smart Control Center Manager app and it is not detected. Unfortunately we do not have a serial cable to connect to it, cannot run Putty etc. I have tried using the reset button at the front but I have seen online this is for rebooting the switch? Is there anyway to just reset its IP at least so I can get onto the management interface? Any help or points in the right direction would be great! :)SRXN3205 previous config loaded, not saving new config
Due to slow performance, i was making factory reset time-to-time twice a year. In my last attempt i accidentally pressed load from previous config since than i've started facing prb. I've tried to factory reset upon reboot but no luck it's giving an error occurred message at all times. Therefore i've decided to change existing config but it's loosing config on each reboot. I've tried factory reset button 30secs while it was on, than another 30 while booting and another 30sec powered off but can't factory reset device. I'm able to access via CLI, however none of the commands are usable. Seems my firmware corrupted looking for a way to upload it again. I've also tried tftp upload but getting time-out errors. Has anyone have any idea ? I'm using this model at home and currently surviving with another pfsense solution but i'd be happy if i can bring back this device to life. Thanks MucoRN102 won't do the factory reset
Wanting the factory reset (push the reset button with a paperclip, put on power, see all lights go on, select Disk 1 with backup button, press the reset again with the paperclip) it won't do the reset. The power button flashes for a moment, and then... nothing happens. And since the RN102 is invisible in my network on 2 computers from one day to another, I guess I have to do the reset..? Does this mean that all data is still available on disc 2 (since it is a 2 bay NAS)? But however, I want it to work again. The factory reset is not working. What can I do?