NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Reset satellite only?
I've done a factory reset via the GUI to try and improve speed. Where I was formerly getting 200+ mbs wireless download speeds I now can't break 100 (I get nearly 300 mbs download speed when Ethernet wired to my ISP modem). If I reset the satellite through the pin hole on the unit will the satellite only reset, or would the GUI reset have taken care of that?GSM7324 Factory Reset
I have obtained a used GSM7324 for some lab work and need to reset to factory default. I have followed some guides power down ... reset button for 10secs.....power on power down ... reset button for 10secs.....keep pressed power on hold for a further 20 secs. Neither has worked. Any advice please I don't have access to PC/Laptop with serial port so cannot use any console connection. Thanks for any adviceTrying to setup WN3000RP after factory reset, but wizard isn't working and neither is mywifiext.net
Kept getting connected, but not internet connection alert. So I did a factory reset, but the wizard isn't coming up when I connect to NETGEAR_EXT and the website www.mywifiext.net isn't coming up either. I just want to set it back up!C6300 Cable Modem Router Bridged. Will Not Factory Reset.
I can log in via browser at 192.168.100.1 (Default Bridge IP), Router Mode is NO and will not change to YES after Apply. Also, Factory Reset button reboots the router but nothing ever changes. Also tried a hard 30/30/30 to no avail. I have a feeling my ISP is up to something (tampabay.rr.com - road runner). Cannot see SSID either as 2.4Ghz is not lit. My Network Map has 300+ items from ISP. Has anyone ever heard of something like this before?GSM7328Sv2 - Factory reset
Wondering if someone can help, we have had this switch for a while and it has been sat in storage for some time. We no longer know the IP of the switch, what subnet it was on etc. After powering it on and letting it boot up, I connect a machine to it and cannot connect to the management interface. It just doesn't want to play ball! If I can get onto the switch and configure its IP, I will install this at one of our other sites, but at the moment I am having some real difficulty getting its IP. I have tried using the Smart Control Center Manager app and it is not detected. Unfortunately we do not have a serial cable to connect to it, cannot run Putty etc. I have tried using the reset button at the front but I have seen online this is for rebooting the switch? Is there anyway to just reset its IP at least so I can get onto the management interface? Any help or points in the right direction would be great! :)