NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
NIGHTHAWK M6 & M6 PRO Connectivity Issue Resolved!
Hello NIGHTHAWK Community, A new software update is now available and being pushed over the air to all AT&T M6 Pro and M6 devices to address the recent Ethernet issue. If your device does not show PRI version 4.10 under Device Information, please check for updates manually from your device. We thank you for your continued patronage! Best, NETGEAR TeamM6 PRO Wifi Signal Dropping Out
We have a M6 Pro Nighthawk modem which has been great & worked very well the past couple of years. The Nighthawk is connected directly to power with no battery fitted & has a couple of wifi cameras running off them at 2.4g. However in the past week (since the latest firmware update 25/10) it now works for a couple of hours & then stops transmitting a wifi signal, like its gone into standby mode... Yes Wifi standby is switch to Never. We are located in Australia & the modem is recieving Telstra 5G signal on the dashboard, however not transmitting wifi to the devices connected. There are 4 devices showing as connected to the Wifi. When you click on the Data Usage section, normally this shows how much data has been used & how many days left on the plan. After a couple of hours once the Wifi transmission signal drops out, if you go back into the Data Usage section it no longer shows any data information - "Data usage info unavailable at this time" is the messaging on the screen. Anyone had any problems with signal dropping out since the firmware update?? Please help... 👍MR7500 M7 Blocking VPN clients with MacOS Tahoe 26
Hi, I run a MacBookPro M2 through a MR7500 Nighthawk M7 (on the Telstra network). I use OpenVPN client software to connect to a remote business network, and it has been running fine for years. However after recently upgrading to MacOS Tahoe 26 on my laptop, iPad and iPhone, my M7 is blocking my Open VPN connections. If I run my iPad, iPhone or Macbook Pro directly through a seperate 5G hotspot everything runs as expected. If I run my iPad, iPhone and MackBook Pro through my MR7500 Nighthawk M7 via a Wi-Fi or wired connection, OpenVPN will connect but I cannot access the business network. I have found I need to run OpenVPN through ProtonVPN (tunnel in a tunnel) to access the business network, which effectively hides OpenVPN from the M7. I reset the M7 back to factory default, but still have the issue. I have uninstalled and reinstalled VPN software multiple times. I have the same problem with the Tunnelblick VPN client, so it is not just OpenVPN. Looks like Apple may have removed some legacy IPsec protocols in Tahoe OS which is tripping up the M7. Does anyone have any suggestions?MR5200 (M5) Download Firmware
Hi guys, I need to update the firmware of my M5 Nighthawk (MR5200); i suspect that it is not working correctly... impossible to connect to any internet operator. I have the firmaware: NTGX55_12.04.17.00 (MR5200-100EUS) Can someone give me a link to download the firmware ? Netgear gives only the app, but with the app impossible to download anyrhing. I would like to do it manually.How do I lock my Netgear Nighthawk hotspot to only use 5G?
It keeps flipping back to 4G even though there is a strong, fast 5G signal available. I have to reboot the hotspot for it to go back to the much faster 5G signal. Give it a few minutes or a few hours and it'll get stuck on 4G. The hotspot is stationary. I am not moving it at all when this happens.MR 7450 is not detectable in mobile app..
Hello! Recently purchased an Nighthawk MR7450 mobile router and am experiencing the following issue: it can't detect in Netgear Mobile app. It's connected via Wi-Fi and web access is fine. I also have an MR6550 mobile hotspot, and it can be detected and connected to your app without any issues. The latest firmware is used. Otherwise, there are no complaints about the work. Has anyone encountered a similar problem?
