NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
switch
5 TopicsMehrere R6400 als WLAN-Access Point mit gleicher SSID
Hallo Community, ich habe folgendes vor und möchte mich informieren ob mein Vorhaben überhaupt machbar ist. DSL via Glasfaser 100MBit/s V Fritz!Box 7590 als LAN-Router und Telefonrouter V Switch 8-Port/Patchfeld V R6400 als WLAN-AP und Switch im Wohnzimmer EG V R6400 als WLAN-AP und Switch im Wohnzimmer OG Telefon wird über die zweite LAN-Leitung verteilt (oder DECT) und kommt direkt von der Fritz. Desweiteren werden am Switch nach der Fritzbox 2xNAS und 1xDrucker betrieben. Plan ist es beide Etagen einwandfrei mit WLAN zu versorgen und diverse Geräte wie TV, Playstation und KODI (Smart-TV) per Kabel am R6400 in den Wohnbereichen anzuschließen. Das WLAN soll auf beiden Routern mit der gleichen SSID und dem gleichen SSID-.WPA2-Passwort angeboten werden sodass per WLAN-Roaming die Endgeräte selbst entscheiden welches Signal besser ist. Das sollte beim R6400 kein Problem sein, da ich festgestellt habe, dass die WLAN Übertragung vom EG ins OG ohnehin schlecht ist. Jetzt meine Frage, ist das ohne Einschränkungen machbar, sodass sich die beiden R6400 nicht in die Quere kommen? Können im AP-Modus noch alle 4 LAN-Ports des R6400 als Switch genutzt werden? Gibt es andere, bessere Möglichkeiten um mein Vorhaben zu ermöglichen? Orbi fällt raus! (sehr unzufrieden). Vielen Dank schonmal für die HilfeSolved2.6KViews0likes2CommentsPOE for GS305P
Can the GS305P switch be powered for its own internal functions by its LAN connection to a POE network switch? I need to split an ethernet connection to two to four desktop PC's, and have a client insisting on a ceiling-mounted data cable reel. There will not be any free outlets to plug in the switch. They are all being used by the actual PC's, montitors, etc. I'm trying to avoid installing a separate reel for each data connection.2.6KViews0likes1CommentNighthawk S8000 Switch Reports Getting "100MB Full" Speed. Gigabit Switch?
My new Nighthawk S8000 (GS808E) switch is proudly reporting all ports are running "100MB Full". Where is the Gigabit performance I paid for? Is there a setting I am missing in the config web server on the switch to open up Gigabit speed on the ports? The S8000 switch is uplinked (port 8) via a 360Mhz Cat5E cable to a Gigabit LAN port on a brand new LinkSys EA9300 router. Router is Cat7 to a cable modem known to push 135MB download. Firmware V1.0.1.6Solved4.5KViews0likes1CommentTwo laptops + switch: Always worked, now it doesn't
Hi, We have two laptop computers, a Mac and a PC. They both connect via Ethernet to a switch (NetGear GS105) and the switch is connected to a modem (no WiFi). For several months now, both computers shared the same internet connection without any problem. Now all of the sudden, I can connect only one or the other or neither, but not both. Time Warner Cable told me that the problem is with the Switch and NetGear are telling me that I need to use a router and not a switch. No one can answer the question: How can it be that both computers worked fine all this time and now they don't. If anyone here can help me get both computers up to the net without spending more money on a router, that would be greatly appreciated. Thank you2.8KViews0likes3CommentsStatic IPs through router as switch with Ubuntu Server
So I have an router and network setup and running fine. port forwarding and static ip is working just fine on my Ubuntu server box, but the ports are full and I need to run the box off a switch now. So I took an old netgear router and set it up as a switch (dynamic ip windows10 pc running through switch fine) but my Server box just won't connect, the light on the router doesn't even light up to say they are communicating. (all the cabling and ports are fine) I am assuming it has something to do with the static ip address, I have added a static route (I also do not know for sure if I am fililng it out right / even if this is something I need to be doing) the set up for the static route has the destination ip set the the ip i am trying to make static and subnet is 255 for all then gateway is the gateway ip and i used metric of 2. thanks for any help.Solved