NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
SRR60 - random Wi-Fi drops
I have an SRR60 with four active SSID's and about 75 devices connected. (A lot of home automation) A couple times a day, the Wi-Fi seems to shut off. Multiple devices and PC's in the house report no Wi-Fi connection. This occurs on all the SSID's 5 and 2.5 at the same time. About a minute or two later everything restores. I'm on the latest/last firmware. 2.7.3.100. The uptime on the debug page is accurate. The unit is not rebooting. No errors or bad signals on the cable modem. (bridged and no Wi-Fi) Any thoughts or suggestions are appreciated.R8000 Firmware
Per NetGear social media, we are supposed to suggest the below idea here. My idea, as crazy as it sounds, is that Netgear continue to support their R8000 devices. I know, sounds insane but hear me out. People spent hundreds of dollars on a product featuring the "latest tri-band wifi" technology. Now instead of leaving them hanging with a big security exploit for two months, device issues and a feature release stall, Netgear should develop a new robust firmware. Ideally it would be one that wouldn't encourage them to go out and try questionable 3rd party firmwares. That means, it should be competitive (feature wise) with those 3rd parties while fixing ongoing issues highlighted in the forums. Benefits: 1. Happy customers who don't feel like they wasted money and are not stranded with a reletively up to date tech, that lacks manufacture support, features and security. 2. See #1 above. I think it deserves reiteration. Facts 1. product saw less than 18 months of firmware releases and developer support. 2. Nearly 9 months have past since the last firmware update (as of 8/31/2016). 3. June 2016: security notice suggested disabling of features due to security exploit. 4. 2 month later, June 2016 security exploit is still unpatched, leaving customers exposed. 5. There are no Nighthawk products listed on the NetGear EoL page, including the R8000. 6. The product is still available through online and big-box retailers.
WAC104 Unable to Control WiFI Channel BandWidth
I setup 4 WAC104 as Acces Points, and there are no settings available to limit channel Bandwidth in 2.4 and 5GHz spectrums. There is a compatibility setting which appears to give no control over BandWidth. The shopping Center is very congested and I would like to force SSID "VillageLife" to 20MHz (See attached Images). This should be a setting to make it more friendly in congested areas. Apple devices do not use 40MHz, only 20MHz. Am I missing something? I contacted Tech Support and they claim there is no setting to limit Bandwidth, and told me to post it here. Most WiFi AP units I have dealt with allow you to limit bandwidth, so I'm surprised to see there is no bandwidth setting, and therefore hard to recommend to other clients (we like the 4 LAN ports SWITCH, allowing us to hardwire local computers to Ethernet and not WiFi).make it possible to go up one level in cli configuration of WNDAP620
it would be cool to be able to go up one level during cli configuration of said AP. Like in Ciscos IOS, if you are in "configure terminal" or in an "interface" you should be able to go up one config level to be able to choose a different configuration item. At the moment you're "stuck" in the lower level and need to reconnect (and relogin) to configure the AP further
Ping spikes and packet loss on WiFi
Hi, I’m having trouble with my orbi router with online gaming over WiFi. For the rest it works extremely well with high speed (400 down 40 up) and very low pings (10ms), all on WiFi. However with online gaming I got ping spikes and packet loss which makes it impossible to game online over WiFi. Over Ethernet it works great so it’s not my ISP that is the issue. How can I solve the spikes? There is not QoS option available in the routers interface. I have tried switching the satellite off but the problem remains. Hope somebody can help! Thanks Christiaan
Hardwire the EX7000 instead of wirelessly connecting to the router?
I’m going to try my best to explain my current situation as best as possible since I’m not entirely tech savvy or literate. My current situation is that there are devices that need to be hardwired but the devices are located in separate rooms. One device in my room and one in my brother’s. Now I know that I can use the EX7000 to wirelessly connect to my router and just use the Ethernet ports but doing that cuts down on download speeds. So I was wondering if I can use the Ethernet port in my room and plug the extender into that so I won’t have to wirelessly connect to the router? The current set up is that we have Frontier FiOS and the ONT box is located in our garage. Not sure what that means but the employee from BestBuy said it acts as the modem so that all the Ethernet ports our house can support a router without the need of an actual modem. So currently, all we currently have the Nighthawk X6 plugged into the Ethernet port in my brother’s room and is producing a Wifi signal with internet. We now both have desktops that have no Wifi adapters. So in order to use the internet on our computer we need to be wired. We used to share a room so it was never a problem since the router was in our room but now that we have our own rooms, he kept the router while I have no possible way of accessing internet via wired connection. Since we both game, we prefer a wired connection overall for the best performance. Hence the reason why we never purchased a Wifi adapter for our PC. While trying to look up a solution for my problem, I was constantly seeing answers like using the EX7000 as an access point. However, instructions say to plug it in to a router, which defeats my purpose of buying the extender in the first place since the extender would need to be located in my brother’s room. So long story short, can I hardwire the EX7000 using the Ethernet port in my room so that it can provide internet to my devices that need to be hardwired into the extender?EX6150 WiFi range extender drops connection for a few seconds very often.
I have the latest firmware. I'm located a floor above my router and use the EX6150 so that I can get a stronger connection in my room. I've noticed that every hour or so, the connection will drop for a few seconds and then reconnect. I used to own the EX6100 and I never had this problem before. Does anyone have any idea as to what is happening here and why this is happening with the new extender but not the old one? I know that it isn't the extender itself because I also own an EX6400 and the same issue occurs. Things I've tried: - Updated to the latest firmware. - Switched Wifi channels. - Removed devices from my network. - Moved the extender to be slightly closer to my router. - Reset the extender. - Reset the router. - Replaced the ethernet cable the extender connects to my PC with. - Replaced the power strip. I'm really at a loss.
