NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Broken or missing SNMP MIBS for firmware 10.0.0.31 (GSM7352Sv2)
I have upgraded a GSM7352Sv2 to 10.0.0.31 firmware, but unfortunately the results to SNMP queries are different to 8.0.3.34. The support pages have no MIB files specifically for 10.0.0.x to downlo...
Such doc is not a strong point of Netgear ;-)
Anyhow, get the MIBs that are in the download section for the M5300s since that is the new line of switches.
I have a GSM7228PS which was (likely like yours) bought a couple of months before M5300 were released, nonetheless they got gifted by 10.x. I generally feel the syntax to be a little more consistent on some edges, I remember some differences in default assumptions for STP.
A handy new feature is the ability to read out some values of installed SFPs.
Another one is the support of private VLANs which can be quite handy to improve security and separation at VLAN level.
8.0.3.34 also has problems with DST updating which 9.x and 10.x don't have.
Anyhow, get the MIBs that are in the download section for the M5300s since that is the new line of switches.
I have a GSM7228PS which was (likely like yours) bought a couple of months before M5300 were released, nonetheless they got gifted by 10.x. I generally feel the syntax to be a little more consistent on some edges, I remember some differences in default assumptions for STP.
A handy new feature is the ability to read out some values of installed SFPs.
Another one is the support of private VLANs which can be quite handy to improve security and separation at VLAN level.
8.0.3.34 also has problems with DST updating which 9.x and 10.x don't have.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
