NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
M4100-D12G Configuring VLANs with shared Internet access
My switch is a GSM5212 with v. 10.0.2.26, (B1.0.1.1) firmware. I am tryng to configure routing VLANs with shared internet access using the guide at :- https://kb.netgear.com/30818/How-to-configure-routing-VLANs-on-a-NETGEAR-managed-switch-with-shared-internet-access
I have followed the guide exactly and DHCP is working on all three VLANs but I am not able to configure the routing on my firewall and cannot be sure that I have the switch totally correct as I cannot ping the firewall from either of the VLANs not directly connected, even though the default route in the switch is set to the firewall port address.
I would be grateful if somebody could please help with diagnosis of my errors!!!
3 Replies
Hi and thanks for the support. I have to leave this issue for a couple of days to work on something else. Can we leave the thread open please and I shall get back to you when I resume work on this problem.
Thanks again.
Hi Budgie4,
As per checking on your profile that your device has a lifetime phone and chat support. It might be better we can take advantage of that. I suggest you to open a chat / case online on NETGEAR support and please let them know that you need assistance on setting up VLAN routing on your switch.
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
