M4100-D12G VLAN routing - ping VLAN1

Jedi_Exile - thanks for reply.

I made configuration as You described. Here is the show running-config. I add only VLAN 7 and change uplink ports (port1 is to DHCP, port 26 is uplink to router). Change switch to M1400-26G.

Of course interface 0/1 is:

interface 0/1

vlan pvid 1

vlan participation include 1

vlan database
vlan 7
vlan routing 1 1
vlan routing 7 3
exit

configure
time-range
ip route 0.0.0.0 0.0.0.0 172.16.5.1
ip helper enable
ip helper-address 172.16.5.2 dhcp
line console
exit

line telnet
exit

line ssh
exit

!

interface 0/1
description 'Port to DHCP Server'
exit

interface 0/7
description 'access port vlan 7'
vlan pvid 7
vlan participation exclude 1
vlan participation include 7
exit

interface 0/26
description 'Port to Router'
exit

interface vlan 1
routing
ip address 172.16.5.254 255.255.255.0
exit

interface vlan 7
routing
ip address 172.16.7.254 255.255.255.0
exit

service dhcp
exit

Also I changed router and DHCP server configuration.

Here is static routes on router

And DHCP server settings

and if I done that host in VLAN 7 can't get IP address. From VLAN 7 host I can't ping any host in VLAN 1 (gateway, clients, DHCP server).

and here is "show arp" from switch:

;

(M4100-26G) #show arp

Age Time (seconds)............................. 1200
Response Time (seconds)........................ 10
Retries........................................ 10
Cache Size..................................... 509
Dynamic Renew Mode ............................ Enable
Total Entry Count Current / Peak .............. 7 / 7
Static Entry Count Configured / Active / Max .. 0 / 0 / 16

  IP Address        MAC Address      Interface        Type        Age
---------------  -----------------  --------------  --------  -----------
172.16.5.1       00:11:32:72:34:B4  vlan 1          Gateway    0h  0m 19s
172.16.5.2       00:11:32:55:A3:1E  vlan 1          Dynamic    0h  3m 57s
172.16.5.40      00:00:00:00:00:00  vlan 1          Dynamic    0h  0m  4s
172.16.5.41      E4:A4:71:90:95:A2  vlan 1          Dynamic    0h  0m 52s
172.16.5.254     C0:FF:D4:AC:67:98  vlan 1          Local         n/a
172.16.7.2       C8:5B:76:3A:2F:ED  vlan 7          Dynamic    0h  0m  4s
172.16.7.254     C0:FF:D4:AC:67:98  vlan 7          Local         n/a

 And if I changed static route Gateway to 172.16.7.254 for VLAN 7 I can ping gateway 172.16.5.1 and other host in VLAN1 (172.16.5.0/24) but not 172.16.5.2 (I disabled firewall on DHCP server).