NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

jpass022's avatar
jpass022
Luminary
Feb 07, 2020

M4300-48X and ReadyNAS 4312X 10G NIC connection unstable

Greetings,

I am experiencing this 10G NIC issue almost on a daily basis, seems to have gotten worse since the latest M4300 firmware update.

I have logs from M4300 and ReadyNAS 4312X upon request...

 

Feb 05, 2020 06:26:09 PM
 
System: Bond interface bond0 slave interface eth4 is online.
Feb 05, 2020 06:25:57 PM
 
System: Bond interface bond0 has slave interface eth4 offline.
Feb 05, 2020 01:19:41 PM
 
System: Bond interface bond0 slave interface eth4 is online.
Feb 05, 2020 01:19:19 PM
 
System: Bond interface bond0 has slave interface eth4 offline.
Feb 05, 2020 10:13:15 AM
 
System: Bond interface bond0 slave interface eth5 is online.
Feb 05, 2020 10:13:03 AM
 
System: Bond interface bond0 has slave interface eth5 offline.

4 Replies

  • DaneA's avatar
    DaneA
    NETGEAR Employee Retired

    jpass022,

     

    What cable are you using between the M4300-48X and ReadyNAS 4312X?  Is it a CAT 6 or CAT6A or CAT7 ethernet cable? 

     

    I suggest the following below to isolate the problem:

     

    a. Try to change the cable you are using between the M4300-48X and ReadyNAS 4312X.  

    b. Try using other ports of the M4300-48X.

    c. Reboot the both M4300-48X and ReadyNAS 4312X. 

     

     

    Regards,

     

    DaneA

    NETGEAR Community Team

    • jpass022's avatar
      jpass022
      Luminary

      Using all CAT7 cables with my M4300 switches. tried different ports and reboots as suggested. Seeing the same with other Linux servers that are using bonded interfaces connected to the M4300 switches. 

       

      • DaneA's avatar
        DaneA
        NETGEAR Employee Retired

        jpass022,

         

        Thank you for the feedback.  Since the same problem is seen on the Linux servers that are using bonded interfaces connected to the M4300 switches, it would be best that you open a support ticket with NETGEAR Support here at anytime.  Kindly state your concern as well as attach the logs you obtained. 

         

         

        Regards,

         

        DaneA

        NETGEAR Community Team

    • jpass022's avatar
      jpass022
      Luminary

      eth4 Link encap:Ethernet HWaddr e8:fc:af:e7:a6:ee
      UP BROADCAST RUNNING SLAVE MULTICAST MTU:9100 Metric:1
      RX packets:1406027554 errors:5269 dropped:689669 overruns:0 frame:5269
      TX packets:174762969 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:2070459717814 (1.8 TiB) TX bytes:93273137321 (86.8 GiB)

      eth5 Link encap:Ethernet HWaddr e8:fc:af:e7:a6:ee
      UP BROADCAST RUNNING SLAVE MULTICAST MTU:9100 Metric:1
      RX packets:480056614 errors:4366 dropped:382364 overruns:0 frame:4366
      TX packets:673074932 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:674795922908 (628.4 GiB) TX bytes:721419014315 (671.8 GiB)

      bond0 Link encap:Ethernet HWaddr e8:fc:af:e7:a6:ee
      inet addr:192.168.1.50 Bcast:192.168.255.255 Mask:255.255.0.0
      UP BROADCAST RUNNING MASTER MULTICAST MTU:9100 Metric:1
      RX packets:1886084087 errors:9635 dropped:1072033 overruns:0 frame:9635
      TX packets:847837874 errors:0 dropped:1691 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:2745255635339 (2.4 TiB) TX bytes:814692147028 (758.7 GiB)

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More