NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
M4300 trying to rest ip http port number to default port 80
Trying to reset the http port back to default 80 from 6535:
my startup-config ... partial ...
exit
ip http port 6535 <---
ip http secure-server
ip http secure-protocol TLS1
ip ssh server enable
CLI manual says:
no ip http port
Switch says:
(M4300-12X12F) (Config)#no ip http ?
accounting Configure an Accounting List.
authentication Configure an Authentication List.
(M4300-12X12F) #show version
Switch: 1
System Description............................. M4300-12X12F ProSAFE 12-port 10GBASE-T and 12-port 10G SFP+, 12.0.2.20, 1.0.0.9
Machine Model.................................. M4300-12X12F
Serial Number.................................. 4G43697E80107
Burned In MAC Address.......................... 10:DA:43:F9:47:91
Software Version............................... 12.0.2.20
CPLD version................................... 0x5
Bootcode Version............................... 1.0.0.9
Current Time................................... Jan 16 09:53:40 2018 (UTC-8:00)
Current SNTP Sync Status....................... Success
(M4300-12X12F) (Config)#show ip http
HTTP Mode (Unsecure)........................... Enabled
HTTP Port...................................... 6535
Maximum Allowable HTTP Sessions................ 16
HTTP Session Hard Timeout...................... 24 hours
HTTP Session Soft Timeout...................... 15 minutes
HTTP Mode (Secure)............................. Enabled
Secure Port.................................... 443
Secure Protocol Level(s)....................... TLS1 -----
Maximum Allowable HTTPS Sessions............... 16
HTTPS session hard timeout..................... 24 hours
HTTPS session soft timeout..................... 15 minutes
Certificate Present............................ True
Certificate Generation In Progress............. False
(M4300-12X12F) (Config)#
(M4300-12X12F) (Config)#show captive-portal
Administrative Mode............................ Disable
Operational Status............................. Disabled
Disable Reason................................. Administrator Disabled
CP IP Address.................................. 0.0.0.0
(M4300-12X12F) (Config)#
Hi CrustySparks,
The issue is that you are doing this from the global config mode. You need to do it from EXEC mode, not config mode :)
As this:
(M4300) >enable
(M4300) #ip http server
(M4300) #ip http port 80Cheers
8 Replies
Dunno why the documented "no ip http port" does not work, no switch at hand, try this:
no ip http server
ip http server
ip http port 80
(M4300-12X12F) (Config)#no ip http server
^
% Invalid input detected at '^' marker.
(M4300-12X12F) (Config)#...continue with the other commands, regardless...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
