NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
NMS300 1.5.0.19 does not display complete Interface List for GS716Tv2
I just installed NMS300 1.5.0.19 to monitor and manage my home network which includes GS108Tv2 (3), GS716Tv2 (1), XS708T (1), WN203 (3) and RN626X. NMS300 discovered all of the switches but LAGS l2 t...
I apologize for this is the only time I got back on this thread.
Here is my suggestion: kindly backup the current configuration of the GS716Tv2. Then, perform a factory reset on the GS716Tv2 and check if the NMS300 can detect all ports on it while its on default configuration. If ever it works while the GS716Tv2 is on default configuration, kindly reconfigure everything from scratch and observe if same problem occurs.
Let us know the results.
Regards,
DaneA
NETGEAR Community Team
Hi jrsmith61,
Welcome to the community! :)
Kindly try the MIB for the GS716Tv2 on this link. The link will expire within 48 hours.
Regards,
DaneA
NETGEAR Community Team
I don't think MIBs are the answer to this problem. Interface information is pulled from the RFC standard MIBs, internet.mgmt.mib-2.interfaces. When I browse the MIB I can clearly see all 25 interfaces in the ifTable. However, Interface List is only showing the first 17 (I have Rows per page set to 50). This is the only 16 port device that I have. All of my other devices have 8 ports. A second device would allow me to determine if this is device specific or not. I plan to add a 24 port switch soon, but I would like to understand and correct this problem before that happens.
Not sure if it is related but the MTU for the first missing lag in the interface list is 9198
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
