Hi, today i update my router R7800 from app on iphoneafter that my router is Power LED Is Blinking and no wifii was on version 10.0.2.36Thank you.

No it should be something like this: tftp -i 192.168.1.1 PUT nameoffirmware.img If you wanna make things simple just rename the file to like a.img so its easier to type or paste in the command prompt.

Power LED is blinking R7800 | NETGEAR Communities

14 Replies

TorkilH
Aspirant
Apr 04, 2018
Got the same problem. :-(
FURRYe38
Guru - Experienced User
Apr 04, 2018
Try a Factory reset on the router and setup from scratch...
- avtella
  Prodigy
  Apr 04, 2018
  You may need to do a tftp flash with the latest firmware or older one if you want. I posted detailed instructions on how but the forum decided it needs to be moderated for some reason.
  
  Just follow these instructions:
  https://community.netgear.com/t5/Nighthawk-WiFi-Routers/SOLVED-Steps-for-debrick-unresponsive-R7000-softbricked/td-p/414034
  - mjeeda
    Aspirant
    Apr 06, 2018
FURRYe38
Guru - Experienced User
Apr 04, 2018
Theres this FAQ:
https://kb.netgear.com/22688/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP

Hopefully a factory reset is all thats needed.
- avtella
  Prodigy
  Apr 04, 2018
  Hopefully, but as for that tftp app its never worked for me. I've always done it directly via prompt.
  - FURRYe38
    Guru - Experienced User
    Apr 04, 2018
    Ya I asked if NG would update that FAQ. Needs updating.

Forum Discussion

Power LED is blinking R7800