Forum Discussion

Aspirant

Jun 26, 2016

Solved

ReadyNAS Pro 2 - no access

Hi,

I have suddenly lost access to the data on my ReadyNAS Pro 2. I can log in via the Web admin interface, but all file sharing protocols are off and can not be turned on.

The situation seems similar to that here Shares-lost and I suspect it is due to log msgs causing full OS partition.

But I have also lost ssh access -so I can not see or login to clear.

How can I fix this?

Regards

/Andy

Hostname: velvet
Model: ReadyNAS Pro 2 [X-RAID2]
Serial: 2K21140D000F5
Firmware: RAIDiator 4.2.28
Memory: 1024 MB [DDR3]
IPv4 address: 1: Not Connected
IPv4 address: 2: 192.168.1.8
Volume C: Online, X-RAID2, 2 disks, 13% of 1841 GB used

File Sharing

StephenB
Jun 26, 2016
Well, the original post was suggesting that you use the procedure here: http://onlyblueatwork.wordpress.com/2012/12/04/netgear-readynas-access-recovery/

followed by mdgm's suggestions after you clean the OS partition

# cd
# sync
# umount /mnt
# mdadm --stop --scan

do you have a backup?

9 Replies

Replies have been turned off for this discussion

MikeFH
Aspirant
Jun 26, 2016
Hi Andy,

Seem's like is a common issue. I even lost acces to the admin GUI and the had to rebuild the OS.

Just for my santy, does you isue look like mine? Link here -> https://community.netgear.com/t5/Using-your-ReadyNAS/cannot-enable-any-readynas-services-in-netgear-readynas/m-p/1105663

Thanks
Mike
- andy-b
  Aspirant
  Jun 26, 2016
  Hi Mike,
  Looks like you are using OS 6. I did not upgrade to that. So while the causes may be similar my issue looks different. I can not enable any protocols and the share list has disappeared.
  /Andy
  - MikeFH
    Aspirant
    Jun 26, 2016
    Thanks.
    
    I am proper stuck ! here...
    
    Looks like i need to back my data up and whipe my NAS and maybe format my disc
    
    Mike