Netgear 810 update

[Retired_Member]

---

@TeeJay74 wrote:

Absolutely great news! Did you notice +20...33 % boost to downlink performance ? What's your download speed with 256-QAM ? It would be great If you could share your signal values as reference when 256-QAM is enabled.

---

Yes, of course, it's a difference between 256QAM and 64QAM. 

Signal values:

!GSTATUS:
Current Time: 1025 Mode: ONLINE System mode: LTE PS state: Attached
EMM state: Registered Normal Service
RRC state: RRC Connected
IMS reg state: No Srv

PCC:
LTE band: B3
LTE bw: 15 MHz
LTE Rx chan: 1779
LTE Tx chan: 19779
RSSI (dBm): -46.9
RSRP (dBm): -78.8
RSRQ (dB): -10.7
RSSNR (dB): 3
Tx Power (dBm):
LTE Cell ID: 409100
Physical Cell ID: 187
TAC: 17716

OK

CQI value is between 12 and 14 with external antennas:

https://www.dropbox.com/s/tfscrqu5q2xjocd/%D0%A1%D0%BA%D1%80%D0%B8%D0%BD%D1%88%D0%BE%D1%82%202017-02...

Speed: Download 35 mbps, Upload: 15 mbps.

---

@TeeJay74 wrote:

Some more questions considering 256-QAM. AC810 '4G details" screen has that Quality indicator. It is a percentage value 0 -100 %. What's your quality value ? What is your physical distance to mast when 256-QAM is active ?

---

https://www.dropbox.com/s/4n9fuchrjsjd9cr/CH%20Quality.PNG?dl=0

About physical distance between device and eNodeB i cant answer, because i'm only a simple user 🙂

Looks like 300 or 400 meters (information about eNodeB from location service xinit.ru). 

[TeeJay74]

How is your typical SINR behavior ? Is it stable or any big variation visible ?

[Retired_Member]

---

@TeeJay74 wrote:

How is your typical SINR behavior ? Is it stable or any big variation visible ?

---

It is not stable. It looks like roller coaster  May drop sometimes and grow again. 

[kirayamto]

I know netgear maybe still working now but we are waiting too long. Ac810s cannot get good performance because the firmware problem

[kirayamto]

Any one know ac810s following action

[kirayamto]

Just received hong kong netgear agent response to me they said R&D department no any firmware will update. I want to know some people said will update firmware by Feb who is correct answer? I doubt netgear until now give any information let me know that . I post picture before show my product is retail version .damn it!

[akido]

Its frustrating, we have to put further stress on netgear through their twitter account to react fastly and correct the buggy firmware of that poor supported device
Copy a link of this forum discussion and send it to netgear on twitter

[kirayamto]

I post twitter already just waiting response

[akido]

They continue to put their head on the sand its an unfair policy toward customers
What we can do else ???? Really fed up **bleep** u netgear !!!

[TeeJay74]

I must admit I have never ever experienced such a weird and difficult device update case than getting the first firmware update to AC810. Bad reputation for Netgear for sure. Hurry is not accepted reason to delay matters indefinitely.

[kirayamto]

WE should giveup waiting this update because netgear maybe no any update idea just foolish us

[Retired_Member]

Ok, we all love Netgear, i hope they release update as soon as possible  Hope R&D team doing their job.

[TeeJay74]

I have tried to find out this from technical side. It looks like small postponement is possible what comes to original February release schedule. They do admit they have some challenges with it. Latest one is implementation of new battery vendor. Because of ISO certification no beta releases are possible. Next target for OTA release is start of next month. So waiting game is still on.

[kirayamto]

Bad news but not surprised .I just buy nighthawk m1transport in next week. i give up to waiting push new update .I believe ac810s retail version very rubbish .don't raises my time play waiting game with netgear

[akido]

Even on twitter they dont reply ,they treat netgear 810 customers as rubbish

[kirayamto]

Sure I post to twitter no response . I suggest don't raise time because never get any information about ac810s retail version .

[Retired_Member]

I am having some problems with the RNDIS functionallity via USB 3.0 ports. RNDIS-connection may drops suddenly and keeps disconnecting. Problem appears with some USB 3.0-controllers, like ASUS ASMedia. Looks like a bug.

With Linux via CDC-EEM usb bridge AIrCard 810 works fine.

[TeeJay74]

Hello,

RNDIS connection, USB3 disconnect/connect loop issues detected too, ASUS motherboards (desktop&notebook)  with Intel/ASmedia USB3 ports. It may help if USB3 hub with external power supply is used. There is still nothing special with AC810's power consumption.

Below is my AC810 power consumption measurements when device is connected to Dovado PRO AC usb3 and usb2 ports.

[Retired_Member]

4G+ indication fix: It is necessary to improve static.css and static_rtl.css stylesheet files for AC810-100EUS. A five-minute job.

[TeeJay74]

AC810 retail firmware update release schedule news would be more than welcome asap.

[stevesw]

Hi,

An updated firmware release for the AC810 retail SKU(AC810-100EUS) is planned for Mar 20.

Steve

[TeeJay74]

Thanks, Steve.

[kirayamto]

this is good news just waiting new firmware update

[akido]

Hope that you will not wait another year for the post mars update and that u intervene in the correct time where bugs are reported by customers
Anyway i welcome strongly the planned update :better late than never

[akido]

Are u sure steve of the date coz am frustrated of the many bugs i suffer from