Orbi WiFi 7 RBE973
Reply

VPN tunnel between SRX5308 and FVS318N

Pappela
Follower

VPN tunnel between SRX5308 and FVS318N

Hi

 

I have set up a VPN tunnel and it works most of the time but after communication interup or power off/on the tunnel don't establish from time to time, for about 25%.I have to turn off/on one or more times.

 

FW in the FVS318 is the last 4.3.3-6 and the configuration is don from an "empty" router.

I have fixa IP address on the SRX and dynamic IP on FVS, in the FVS I use aggressiv mode and initsiator. I have set the ping time to 10 sec and 3 retries so it should try to connect after at maximum 1 min.

Is this a known commen problem is so is there any work around.

I have other FVS318 routers with FW 3.x.x and I don't see this problem there.

 

Happy for an reply on this

Peter

Message 1 of 2
JohnRo
NETGEAR Employee Retired

Re: VPN tunnel between SRX5308 and FVS318N

Hello Pappela, 

 

Welcome to the community! 

 

I have not seen reported cases regarding the issue you are having so I would not say that this is a common issue. The question here should be, how long does the FVS318N's connection is established? Can you run a ping test going to a website or public DNS and restart the FVS318N and see how long it gets the connection back after the restart? 

 

Thanks, 

Message 2 of 2
Top Contributors
Discussion stats
  • 1 reply
  • 3352 views
  • 0 kudos
  • 2 in conversation
Announcements