M4300 stack: hapiBroadTxLplist: No TX ports given

[Stan1212]

Hello netgear community.

I found a similar issue here https://community.netgear.com/t5/Managed-Switches/M4300-48X-hapiBroadTxLplist-No-TX-ports-given/m-p/... but since i don't understand german completely i decided to start a new topic.

Ok, i'm running a stack of 2 m4300 12x12f units and my logs are filled with the following messages i don't quite understand:

<15> Nov 13 09:20:33 192.168.0.239-1 DRIVER[snoopTask]: broad_tx.c(228) 130928 %% hapiBroadTxLplist: No TX ports given
<15> Nov 13 09:18:28 192.168.0.239-1 DRIVER[snoopTask]: broad_tx.c(228) 130927 %% hapiBroadTxLplist: No TX ports given
<15> Nov 13 09:16:23 192.168.0.239-1 DRIVER[snoopTask]: broad_tx.c(228) 130926 %% hapiBroadTxLplist: No TX ports given
<15> Nov 13 09:14:18 192.168.0.239-1 DRIVER[snoopTask]: broad_tx.c(228) 130925 %% hapiBroadTxLplist: No TX ports given
<15> Nov 13 09:12:13 192.168.0.239-1 DRIVER[snoopTask]: broad_tx.c(228) 130924 %% hapiBroadTxLplist: No TX ports given

My system software version is 12.0.2.6. 

Is 192.168.0.239 a default switch ip address of vlan 1?

Should i consider a software update or maybe you'll be able to give a different advice?

Thanks in advance.

[msi]

Hi

Since I do understand german I've given a look at the linked thread. It does seem that updating and / or rebooting fixed his issues. In fact he is not 100% certain but confirmed that his problem whent away after updating (and thus rebooting) the stack to 12.0.7.17.

Since I've worked with Netgear on stacking issues around the 12.0.7.x releases that affected a setup of mine with M4300-12X12F (like you)l, I can confirm that they did indeed fix a couple of issues over the time. Your version dates back from october 2016 so it should be well worth considering an update anyway.

[Stan1212]

Ok, so i'll update a software and write back if issue is not solved. 

Thanks!