NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
XS712T with amber power led after firmware upgrade
Hi all,
I had some issue's with my XS712T and I saw a firmware update for my switch. I uploaded the firmware and after it was done I got 404 page back from the switch. I waited a while. A long while but nothing changed. So I disconnected the power and connected it again. Now I have a amber/orange power led. No flashing.
I tried the Reset button and also the Factory Defaults button but nothing.
Help!
How can I boot from the second image?
If you can find the serial console port (9600 baud) on the switch these are the commando's to upload the firmware to the switch:
- Download the latest firmware
- First setup a tftp server on you pc with IP 192.168.0.254
- Run these commando's via the serial console:
ifconfig eth0 -addr=192.168.0.238 -mask=255.255.255.0 -gw=192.168.0.254
flash tftp://192.168.0.254/netgear/xs712t-v6.1.0.36.stk flash2.stk1
- Reset the switch
- Done!
2 Replies
Or how do I get the switch working in a way that I can go back to the old Firmware?
If you can find the serial console port (9600 baud) on the switch these are the commando's to upload the firmware to the switch:
- Download the latest firmware
- First setup a tftp server on you pc with IP 192.168.0.254
- Run these commando's via the serial console:
ifconfig eth0 -addr=192.168.0.238 -mask=255.255.255.0 -gw=192.168.0.254
flash tftp://192.168.0.254/netgear/xs712t-v6.1.0.36.stk flash2.stk1
- Reset the switch
- Done!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
