- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: Moving from single redundancy to dual - RNDU6000
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Moving from single redundancy to dual - RNDU6000
I am runnning a ReadyNAS Ultra 6 (RNDU6000) on OS v6.10.7
I have 5x 8TB disks in the bays and it's currently setup as X-RAID/RAID 5.
If I want to add a 6th disk as dual redundancy, how do I best achieve this?
I recall reading about changing to Flex-RAID first and then adding a final disk and choosing how it's used.
Is this correct?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Moving from single redundancy to dual - RNDU6000
@patdman81 wrote:
If I want to add a 6th disk as dual redundancy, how do I best achieve this?
I recall reading about changing to Flex-RAID first and then adding a final disk and choosing how it's used.
Is this correct?
Yes. You will need to ensure that this disk is as large as the biggest one in the array (and there need to be 3 disks already in the array of that size).
After adding the new disk for redundancy, you should be able to switch back to X-RAID if you like.
Once you are using RAID-5, future expansion will require upgrading 4 of the disks to the new larger size.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Moving from single redundancy to dual - RNDU6000
Sounds good, thanks Stephen.
If I want to enlarge my storage in the future, are you saying that I would need to upgrade at least 4 of the disks?
I'm ok with that, but in that case, what would the steps be?
e.g. If I move from 8TB drives to 16TB drives in the future, would I swap out one at a time and after each swap, let the re-sync happen, getting my extra storage after the 4th 16TB has been swapped in?
You are indeed the forum guru, thanks for answering all my questions!
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Moving from single redundancy to dual - RNDU6000
@patdman81 wrote:
e.g. If I move from 8TB drives to 16TB drives in the future, would I swap out one at a time and after each swap, let the re-sync happen, getting my extra storage after the 4th 16TB has been swapped in?
Exactly.