Spec Sheets and Replacement Parts

[dbott67]

I figured that it might be a good idea to create a thread where people might be able to obtain information about Infrant-branded ReadyNAS products that may no longer be produced or for products that are out of warranty.

Owners of Netgear-branded products should contact Netgear support.

Anyhow, here are a few links to existing threads that offer solutions, spec sheets, part numbers or third-party replacement items for the older Infrant-branded line-up. Feel free to add your own findings to the list.

-Dave

Spec Sheets:

ReadyNAS 600: http://www.infrant.com/download/ReadyNAS600
ReadyNAS X6: http://www.infrant.com/download/ReadyNAS_X6
ReadyNAS NV: http://www.infrant.com/download/ReadyNAS_NV
ReadyNAS NV+: http://www.infrant.com/download/ReadyNAS_NV+
ReadyNAS 1100: http://www.infrant.com/download/ReadyNAS1100

Cross-reference Table of Duo, NV+, 1100 and Pro:

From this thread:
viewtopic.php?f=24&t=18617#p100422
http://www.bott.ca/files/ReadyNAS_comparison.xls

Determining Revision Number for ReadyNAS 600:

faq.php#What_ReadyNAS_600_revision_do_I_have%3F

Replacing PSU with 3rd Party Power Supply:

If you are having difficulty locating a replacement PSU from Netgear, you can elect to purchase a PSU from a third party, such as Enhance. The NV/NV+ PSU require modification from the standard ATX wiring. A number of users have posted there instructions in thread #1 (below). TrophyGeek & kspades have also posted photos.

1. viewtopic.php?f=11&t=13492&st=0&sk=t&sd=a
2. viewtopic.php?f=7&t=18618

As for the 600 & X6 ReadyNAS, the device uses a standard connector ATX PSU (although the form-factor is different). The only difference between the A & B models is that the 600 Rev. A requires a 20-pin ATX with 4 SATA connections, similar to something like this:

viewtopic.php?f=7&t=18618&p=100893#p100893

The original PSU for the X6/600a/600b was made by Enhance Power (http://www.enhanceusa.com) and was model # ENP-2222F. The A revision of the 600 had 4 SATA connectors, but it carried the same model # as the X6/600b (see pics below by chirpa).

ReadyNAS PSU Pin-out Information:
http://www.infrant.com/download/ReadyNAS_PSU_pinout.pdf

Official NV/NV+ Power Replacement Instructions:

faq.php#How_do_I_replace_the_stock_power_supply_on_the_ReadyNas_NV%2FNV%2B%3F
http://www.readynas.com/download/docume ... %20PSU.pdf

Parts List:

Here are some other part numbers listed from http://www.archive.org's cache of shop-infrant.com:

MAJOR DISCLAIMER: This is cached version of the site as it existed in August of 2007. Parts, prices, availabilty may have changed. This is for entertainment purposes only. 🙂

Parts and accessories

Lockable disk tray for Infrant ReadyNAS NV+
Part# RNV2-DTR1
RNV2-DTR1
Price:$25.00

Chassis fan for Infrant ReadyNAS NV+, 12VDC, 92mm
Part# RNV2-FAN1
RNV2-FAN1
Price:$20.00

AC power supply for Infrant ReadyNAS NV+, 100-240 VAC, 50/60 Hz
Part# RNV2-PSU2
RNV2-PSU2
Price:$120.00

AC Power Supply Unit for ReadyNAS 1100, 100-240VAC, 50/60 Hz
Part# RN1100-PSU1
RN1100-PSU1
Price:$140.00

Hotswapple Disk Tray for ReadyNAS 1100, Single
Part# RN1100-TRAY1
RN1100-TRAY1
Price:$25.00

Chassis Cooling Fan for ReadyNAS 1100
Part# RN1100-FAN1
RN1100-FAN1
Price:$15.00

Optional 26" Rack Mount Sliding Rail for ReadyNAS 1100.
Part# RN1100-SR26
RN1100-SR26
Price:$60.00

1GB SODIMM for NV and NV+
Part# 1GBSODIMM
1GB SODIMM for NV and NV+
Price:$140.00

Cross flow fan for Version A ReadyNAS 600/X6
Part# RN06-FAN1
Cross flow fan for Version A ReadyNAS 600/X6
Price:$20.00

120mm Fan Retrofit Kit for ReadyNAS 600/X6 Version B.
Part# RN06-B120KIT
ReadyNAS 600/X6 Version B 120mm Fan Retrofit Kit
Price:$40.00

Infrant ReadyNAS 600/X6 (Version A) Power Supply Unit
Part# RN06-PSU1
ReadyNAS 600/X6 (Version A) Power Supply Unit
Price:$60.00

Infrant ReadyNAS 600/X6 (Version B) Power Supply Unit
Part# RN06-PSU2
ReadyNAS 600/X6 (Version B) Power Supply Unit
Price:$60.00

Pre-configured 750GB HDD with Disk Tray for NV/NV+
Part# B750640NS
750GB Pre-configured Seagate ES HDD for ReadyNAS NV/NV+
Price:$470.00

Pre-configured 500GB HDD with Disk Tray for NV/NV+
Part# B500630NS
500GB Pre-configured Seagate ES HDD for ReadyNAS NV/NV+
Price:$240.00

Pre-configured 250GB HDD with Disk Tray for NV/NV+
Part# B250620NS
250GB Pre-configured Seagate ES HDD for ReadyNAS NV/NV+
Price:$130.00

Pre-configured 400GB HDD with Disk Tray for NV/NV+
Part# B400620NS
400GB Pre-configured Seagate ES HDD for ReadyNAS NV/NV+
Price:$195.00

Chassis Cooling Fan for ReadyNAS 1000S (single)
Part# RN1000S-FAN1
RN1000S-FAN1
Price:$10.00

Chassis Cooling Fan for ReadyNAS 1000S (dual fan w/single connector)
Part# RN1000S-FAN2
RN1000S-FAN2
Price:$10.00

ReadyNAS NV/NV+ Disk Installation Screws.
Part# RNV-SCREW
ReadyNAS NV/NV+ Disk Installation Screws.
Price:$5.00

-Dave

[andyv]

I have an X6 and need to replace Fan 3 again - we did it almost exactly a year ago. Previously, I just ordered it from the Infrant Store but since that is no more, I'm not sure where I can purchase it from. Does anyone on the board have any suggestions as to how to approach this?

Thanks,
Andy

###############################

Name Code Qty Each Options
----------------------------------------------------------------
Cross flow fan for RN06-FAN1 1 20.00
Version A ReadyNAS 600/X6
(Shipped)

[dbott67]

andyv wrote:

I have an X6 and need to replace Fan 3 again - we did it almost exactly a year ago. Previously, I just ordered it from the Infrant Store but since that is no more, I'm not sure where I can purchase it from. Does anyone on the board have any suggestions as to how to approach this? Thanks, Andy ############################### Name Code Qty Each Options ---------------------------------------------------------------- Cross flow fan for RN06-FAN1 1 20.00 Version A ReadyNAS 600/X6 (Shipped)

I think this may do it for you:

from this thread: viewtopic.php?f=7&t=18618&start=0&st=0&sk=t&sd=a

Chocomonsters wrote:

I have replaced the fan twice so far in my ReadyNas x-6 rev A. Once fan has failed and it was replaced under warranty. Second time it was out of warranty and it was making rattling noise. I found an identical fan manufactured for Silverstone by a third party in Taiwan. I've purchased it through NewEgg. I am not sure NetGear will sanction this fan, but if your NAS is out of warranty it is an option. You can search for SILVERSTONE RL-FX121 Case Fan ( http://www.newegg.com/Product/Product.a ... 6835220002 ).

Blessed by a Jedi:

chirpa wrote:
Yes, the FX-121 from Silverstone is a suitable replacement.

[chirpa]

Great collection Dave!

I'll add one thing...

The Jedi have drive tray SCREWS available for $5.99 (includes shipping) upon request (USA only). PM me for info.

[andyv]

Thanks all - I appreciate the fast help.

[chirpa]

ReadyNAS 600 RevA PSU:



ReadyNAS 600 RevB PSU:



ReadyNAS 600 Cross-Flow Fan:

[chirpa]

ReadyNAS NV/NV+ PSU:


ReadyNAS 1000s PSU:



ReadyNAS 1100 PSU:

[chirpa]

Disk Tray Screw specs: viewtopic.php?p=105952#p105952

[onsetit]

I need to replace the fan in a ReadyNAS 1000s. The replacement part is RN1000-S. It is discontinued. Where can I find a 3rd party fan??

Thanks!

[MrCyberdude]

Can someone confirm that this is the same size and specs?
My concern is that it doesnt appear to have the same sata conectors!
.
ENP-2222F = 220W TFX 12V Power Supply; 140x85x62 mm

http://enhance-electronics.industrialpa ... -2222f.htm
Part Number:ENP-2222F
Model Number:ENP-2222F
Make:ENHANCE ELECTRONICS
Lead Time:Available
Qty In Stock:Available

================ http://www.itus.se/pdf/tfx12v/enp2220f.pdf ======OLD Version Maybe===
================ http://www.itus.se/pdf/tfx12v/enp2222f.pdf =======================
TFX 12V ENP2222F 220W

Features
TFX 12V Compliant Passive PFC
Remote on/off Manual select switch
Protection High Output Current for +5Vsb
Short Circuit
Over Voltage Protection
UL / cUL, CB, TUV Safety approved
FCC / CE EMC Approved
High efficiency Dimension ( W x L x H ) : 85 x 140 x 62 mm
Optional Fan Speed Thermal Control
Voltage Regulation

Minimum Maximum Peak 
+3.3V  +/-5%   0.3A  17A  -- 
+5V    +/-5%   0.3A  13A  -- 
+12V   +/-5%   1.0A  16A  17A 
-12V   +/-10%   0A  0.3A  -- 
+5Vsb  +/-5%    0A  2.0A 2.5A
* 3.3V & 5V combine load 80W 

Input Voltage 100 -127/200 - 240VAC Manual select switch
Frequency 47 ~ 63 Hz

Input Current
5A @ 115VAC
3A @ 230VAC

Hold up time 16ms@ full load
High efficiency 70% at Full Load

Over Voltage Protection
+5V Output ≦ 7.5V Max
+3.3V Output ≦ 4.3V Max
+12V Output ≦ 16.2V Max

Short-Circuit Protection On each channel

Environmental Specification
Operating / Storage Temp 0 ~ 40oC / -20 ~ 70oC
Relative Humidity 5 ~ 95%
Operating / Storage Altitude 10,000 / 50,000 FT
MTBF 100,000 HRS
Safety Approvals UL/CUL, CB, TUV,
Nemko
EMC Regulations FCC, CE

Apply for All Intel Processors upto P4
All AMD Processors upto Athlon

Last Update : 7/2/2003

USA OFFICE
13100 ALONDRA BLVD., UNIT 106,
CERRITOS, CA 90703
E-MAIL : sales@enhanceusa.com
TEL : +1 562 677 1268 FAX : +1 562 677 1269

[Gladys]

Hi Chirpa,

Is there a way I can order a replacement X6 Rev A PSU?

Thanks,

[chirpa]

Gladys,

From NETGEAR HQ, we can only ship out in the Domestic USA. If you are International, will need to find another source, or someone in the USA it could be shipped to.

We have a few of those PSUs kicking around from the Infrant days, so it is possible at this time. The cost would be $20. You can call support (number in my signature below), and ask for the case to be escalated to L3, reference this forum post to the techs, so they know who to get the PSU from (me).

For others reading this in the future, this may not be possible at that time, there is limited supply.

[Gladys]

Thanks Chirpa,

I have decided to do some mods and go for the Picopsu. Seems like an OK solution.
It's good to see you still offer the great support I was used to years ago.

Cheers,

[chirpa]

I'd consider the picoPSU too, looks like a nice mod.

[Gladys]

Chirpa,

The picoPSU I bought is (I think) underpowered. I'd still be interested in buying two of the PSU's you guys still have lying around. Can you PM me with the details and the info you need from me?

Thanks!

Gladys

[chirpa]

Gladys, will contact you shortly.

[Davide_NYC]

Any ideas if it is possible to purchase one of these?

120mm Fan Retrofit Kit for ReadyNAS 600/X6 Version B.
Part# RN06-B120KIT
ReadyNAS 600/X6 Version B 120mm Fan Retrofit Kit 

Or just the metal parts....

(I can source a 120mm fan) :wink:

[chirpa]

Nope, zero stock of that left. You would have to fabricate your own.

[Davide_NYC]

Thanks for the reply.
Zip-ties to the rescue!

[nicklebon]

onsetit wrote:
I need to replace the fan in a ReadyNAS 1000s. The replacement part is RN1000-S. It is discontinued. Where can I find a 3rd party fan?? Thanks!

Did you have any luck on this? I find myself in the same boat.

Thanks

[chirpa]

How many fans are on the fan header wire? Some revisions had just one fan, some had two fans. I can probably find some spares around the office still.

[nicklebon]

chirpa wrote:
How many fans are on the fan header wire? Some revisions had just one fan, some had two fans. I can probably find some spares around the office still.

Wow! That quicker than I expected.The bad fan is the rightmost fan on the 2 fan header.

Thanks

[chirpa]

And it is just one fan on that header alone?

[nicklebon]

chirpa wrote:
And it is just one fan on that header alone?

There are 2 fans on that header.


Thanks

[gaf1]

I'm looking for the part number for the Sliding Rails Kit for ReadyNAS 3100. I was unable to locate it in this forum or the Netgear site.