Double NAT

[rwxrwx]

To resolve a double NAT issue I toggled off the router portion of my combo router/modem unit.  Now I can't access the modem to change settings using the IP address 192.168.0.1, 192.168.1.1 nor the web addresses such as routerlogin.com.

How do I access my combo when the only method by which to do is via wifi?  I will add that my PC is hardwired via ethernet and not wifi and is what I use to access the unit.

[plemans · Accepted solution]

try 192.168.100.1

That's the default address for the modem. 

[plemans · Accepted solution]

try 192.168.100.1

That's the default address for the modem. 

[rwxrwx]

Thank you!  That worked!

I have one other concern though.  Most of the settings that were there prior to me turning the router off are now gone.  There a reason for that?

[plemans]

Not 100% but switching it over to modem only mode disables the router function. maybe its a component of modem only mode to reset the router back to defaults. 

[rwxrwx]

Gotcha.  I had port forwarding set up and now I do not have access to that feature.  I'm going to leave the router off nonetheless.  I was having trouble with using Plex and hoping that resolves the problem.

Thanks again.