Orbi WiFi 7 RBE973
Reply

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

RW_MP
Aspirant

Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

My Nighthawk R7000 AC1900 Dual Band WIFI just updated to Firmware Version: V1.0.8.34_1.2.15.  I used the process  Router Update, Check for new version from the Internet.

Where can I find the release notes for V1.0.8.34?

There seems to be a new Router Auto Firmware Update option.
What is the mechanism for the auto update?

Do I get a message giving me an option when the update will occur?

 

Thanks

Model: R7000|Nighthawk AC1900 Dual Band WiFi Router
Message 1 of 71

Accepted Solutions
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Information from ElaineM:
"We are working to rollout a new firmware with additional features for existing customers in a phased manner. Once the rollout is completed, we will make the firmware available on support site for a wider audience."

View solution in original post

Message 22 of 71

All Replies
mondenath
Prodigy

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

There is no download for that in download section yet.

Message 2 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

May be you have R7000P router?

Message 3 of 71
mondenath
Prodigy

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

It highly unlikely as its current in 1.0.5x series cant just skip 2 running number

 

share your model snaphot

 

probably a home page top bar alone from left to right end

Message 4 of 71
RW_MP
Aspirant

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Model: R7000 AC1900 Dual Band WiFi router

NetgearModel.JPG

 

 

 

 

 

 

 

 

 

 

 Firmware Version:

 

Firmware ver.jpg

 

Update feature in genie update page:

 

AutoUpdate.jpg

Model: R7000|Nighthawk AC1900 Dual Band WiFi Router
Message 5 of 71
RW_MP
Aspirant

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

I used the genie online update to get from 1.0.7.x to 1.0.8.x.  When I checked the download page, there are no release notes.  That is why I am asking where I can find 1.0.8.x notes.

Message 6 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Now checked via Genie app and only old version is available. Very strange.

Message 7 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Message 8 of 71
droyder
Aspirant

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

I just ran the manual Router update from Genie and my R7000 also updated to "Firmware Version V1.0.8.34_1.2.15".

I wonder what changes come with this FW other than the option to automatically update the FW.

Message 9 of 71
NetworkNH
Guide

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Checked my R7000 tonight and took a screen shot when checking for a firmware update.  I'm tempted to update but want to see what ElaineM says regarding this latest release.  Just got an email from Netgear Engineering regarding the WAN uptime status bug - hoping to work with them and find a resolution.  According to the release notes listed by the upgrade utility, it appears this new firmware allows for increased analystics data - maybe this will help pinpoint some strange issues we've all been having.


ng_firmware.JPG

Message 10 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Strange, i have no update at all. Still only 1.0.7.12 is available.
Message 11 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Where to download it manualy?

Message 12 of 71
droyder
Aspirant

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Make a backup copy of your current settings (.cfg file) under Advanced > Backup Settings and then do a hard reset of your router. Once it's been reset and you're connected via ethernet, it should cue the FW upgrade option when you're doing the initial setup again.

 

Then just upload that config file and your previous settings will be back.

Message 13 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

You wrote to me? I checked firmware updates and there is no updates on my router. Strange.

Message 14 of 71
droyder
Aspirant

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34


@shamarin wrote:

You wrote to me? I checked firmware updates and there is no updates on my router. Strange.


Yes, I'm saying that if you really want to upgrade your FW now, try what I just recommended.

 

I didn't even know there was a new FW available today, but this morning I just so happened to do a hard reset of my modem and R7000 (by purshing reset pin on the back). And once everything was back on and I connected to the router via ethernet, Genie alterted me there was a new FW and so I did the update. So following those same steps will likely cue the FW update for you too should you like to act now.

 

Message 15 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Thanks, will try. I tried to switch language to English from Russian, also reflash it to 1.0.7.12. In both cases i didn't found availability of new firmware.

Message 16 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Tried to reset and make a internet connection, no new FW.

Message 17 of 71

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

These things land at different times in different places. When it is widely available, find it here

 

>>>> R7000 | Product | Support | NETGEAR <<<<

 

 

Message 18 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

I knew there to find, the question is there to get it now. Always we get links here if FW is not in support link. Why now we didn't get any post about new firmware.

Message 19 of 71

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Wait for it to arrive.

 

Message 20 of 71
ankydu
Guide

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Maybe a last minute issue was detect in Firmware Version V1.0.8.34 and it was pulled.

Model: R7000|Nighthawk AC1900 Dual Band WiFi Router
Message 21 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Information from ElaineM:
"We are working to rollout a new firmware with additional features for existing customers in a phased manner. Once the rollout is completed, we will make the firmware available on support site for a wider audience."

Message 22 of 71
Retired_Member
Not applicable

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Firmware upate 1.0.8.34 recieved on the R7000, it was a suprise as the last update was not long ago.

Message 23 of 71
shamarin
Virtuoso

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

Great! My is still on 1.0.7.10 and no update.

Message 24 of 71
bjwierda
Aspirant

Re: Nighthawk R7000 Updated to Firmware Version: V1.0.8.34

V1.0.7.12_1.2.5 here

Message 25 of 71
Top Contributors
Discussion stats
Announcements

Orbi 770 Series