No connection when IP-MAC Binding is on

[catik]

On V1.0.9.88 ,  No internet connection & couldn't log into router when IP-MAC Binding is on, now I'm on V1.0.11.116, this problem still exists, while everything worked well on V1.0.9.64 with IP-MAC Binding checked.  I didn't try other versions firmware. 

My configuration: 

Internet Setup: PPOE

Wireless Setup: 2.4g disabled, 5g enabled

WAN Setup:  Disable Port Scan and DoS Protection - off

                     Default DMZ Server - off

                     Respond to Ping on Internet Port - off
                     Disable IGMP Proxying - on
                     MTU Size(in bytes) - default
                     NAT Filtering - Secured
                    Disable SIP ALG - on

LAN Setup: Use Router as DHCP Server - on

                   Address Reservation - yes (with several ip mac )

QoS : off

WMM: on

Guest Network Settings : off

Access Control : enabled (when disabled,  problem still exists)

Block Sites: never

Block Services:  never

Schedule : Every Day/All Day

E-mail:  disabled

Port Forwarding / Port Triggering : none

Dynamic DNS: disabled

VPN Service : disabled

Static Routes: none

Remote Management: disabled

UPnP: on

IPV6: disabled

VLAN / Bridge Settings: disabled

[catik]

any solutions? 

[antinode]

> [...] No internet connection & couldn't log into router when IP-MAC
> Binding is on, [...]

   I don't know what "IP-MAC Binding" means to you, or where it might be
"checked".  It sounds like what Netgear calls (DHCP) Address
Reservation, but that doesn't seem to match your description.

> [...] I didn't try other versions firmware.

   There's a newer "Hot Fix" one now.

   "couldn't" is not a useful problem description.  It does not say what
you did.  It does not say what happened when you did it.  As usual,
showing actual actions (commands) with their actual results (error
messages, LED indicators, ...) can be more helpful than vague
descriptions or interpretations.

> any solutions?

   Might need to understand the problem first.

[catik]

---

   I don't know what "IP-MAC Binding" means to you, or where it might be
"checked".  It sounds like what Netgear calls (DHCP) Address
Reservation, but that doesn't seem to match your description.

---

ADVANCED -> Security ->ARP Protection / IP MAC Binding

"checked" means "enable"

---

  There's a newer "Hot Fix" one now.

---

since some onwers roll the dice on 1.0.11.122 and have issues, I won't try it now