- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: Downgrade RN104 from 6.4.0 to 6.2.X Possible? USB Driver for PCTV 461e and serialusb do not work
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Downgrade RN104 from 6.4.0 to 6.2.X Possible? USB Driver for PCTV 461e and serialusb do not work
Today i´ve purchased the V5 License AND installed the ReadyNAS 6.4.0 (System Break due App uninstall on 6.2.2, so i had to upgrade)
However, The OS works fine but the Stick for DVBLink will no longer detected:
"There are no compatible tuners detected on your system. For the list of compatible tuners please click here."
With ReadyNAS 6.2.2 and DVBLink 4.6.0 all worked fine, but i have no longer the license...
Downgrade RN104 from 6.4.0 to 6.2.X Possible? USB Driver for PCTV 461e and serialusb do not work
I´m no sure if the stick work with the 4.1.7.armada.1 kernel.
But since kernel 3.14 the driver should be in the kernel???
Can i downgrade to the kernel of 6.2.X so my enocean stick and my DVBLink PCTV 461e Stick will hopefully work.
Thanks, Peter
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Downgrade RN104 from 6.4.0 to 6.2.X Possible? USB Driver for PCTV 461e and serialusb do not work
You can't downgrade from 6.4 to 6.2, as 6.4 enables quotas on the file system, something 6.2 cannot support. Also, many database changes were made, so downgrading won't understand those new changes either. Upgrading to 6.4 also changes the bootloader.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Downgrade RN104 from 6.4.0 to 6.2.X Possible? USB Driver for PCTV 461e and serialusb do not work
Hello,
I have the same problem when I made upgrade from 6.4.0 to 6.2.4 the DVBlink SW don´t see my PCTV 73se connected in USB port. Will you do some patch for resolve this problem?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Downgrade RN104 from 6.4.0 to 6.2.X Possible? USB Driver for PCTV 461e and serialusb do not work
Sorry I made mistake....
I have the same problem when I made upgrade from 6.2.4 to 6.4.0 the DVBlink SW don´t see my PCTV 73se connected in USB port. Will you do some patch for resolve this problem?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Downgrade RN104 from 6.4.0 to 6.2.X Possible? USB Driver for PCTV 461e and serialusb do not work
@Kortus wrote:Sorry I made mistake....
I have the same problem when I made upgrade from 6.2.4 to 6.4.0 the DVBlink SW don´t see my PCTV 73se connected in USB port. Will you do some patch for resolve this problem?
Take a look to DVBlogic Forum... I made a post with a solution which worked for me.
http://forum.dvblogic.com/viewtopic.php?f=76&t=30378&p=107742#p107742
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Downgrade RN104 from 6.4.0 to 6.2.X Possible? USB Driver for PCTV 461e and serialusb do not work
Thank you for response and link. Unfortunately I have ReadyNas with x86 processor (312) and I cannot use your kernelmodules