- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
Hi,
first of all sorry for my english.
I have just bought a ReadyNas104, by now I have configured the FTP SERVER, it is easy, it works ok but one thing fails. I have tested it in my gigabyte lan with a PC-W7 and iMac-Mavericks and with just FTP I get about 80-90MB/s (perfect!) but If I activate the FTPS option the performance speed falls till 10-11 MB.
I know FTPS can make lost some speed but not so much!
Before buying the nas, I use a W7 Filezilla Server. At first, I get the same problem, but changing INTERNAL BUFFER SIZE parameter get it working.
Any idea?
Thanks in advance!
Greetings
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
Hello clamatac,
First off, your english is amazing so don't be sorry about it. 🙂
I agree that the speed drop is a bit drastic, I would like to know more information for us to help you with the issue you are having. I have listed down some of them below:
-Firmware version
-I would also like to know if you have jumbo frames enabled or disabled?
I'll be waiting for your response.
Thanks,
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
Hi,
thanks for your quick answer
I have ReadyNas 104 with firmware 6.2.4
Sorry, I do not know what jumbo frames are, where can i look at it?
Greetings
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
Hello again clamatac,
It does not really say jumbo frames though, please check your MTU. Go to Network, click the gear icon and then "Settings" and see what the value of your MTU is.
Thanks,
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
ok
1500 is the value, I have not changed it in any momment.
I have detected another problem, today the NAS 104 has crashed twice, ping did not respond, so I have to restart it manually taking out the power cable. Both times have ocurred while a couple of friends were taking files from my ftp.
I thing both things have someting in common.
Greetings
Carlos
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
clamatac please send me your logs (see the Sending Logs link in my sig).
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
email send.
before downloading the log, I have download 1 file from the ftp with FTPS activated, and 1 without FTPS activated.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
NAS has completely crash again, I have send an email with new logs afters this 3rd totally crash
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
Thanks for the logs.
Please try 6.2.5-RC1: https://community.netgear.com/t5/ReadyNAS-Beta-Release/ReadyNASOS-6-2-5-RC1/td-p/950451/jump-to/firs...
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
done
everything continues the same
very slow with ftps, and the worse, crashes continues.
I have send new logs via e-mail
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
Does it only crash if you are using FTPS?
The 104 has limited resources and the seucirty overhead of ftps would make a bigger difference to performance than it would with other models.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
no, it crashes in general
I have bought it in Amazon.es and I have asked them a change for a new unit, the new unit will arrive me during the week.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
Hi people,
I have changed my 104 unit for a new one, thanks Amazon for the fast replacement! 🙂
In this new nas 104, with the latest firmware 6.2.5, I have no new crashes! it's working like a rock since more than a week.
Unfortunately the problem with the FTPS speeds continues.
For discarding problems with my home-ftth-router I have connected my PC directly to the nas, and it happens the same, 60-80MB/s with FTP, and 10-11MB/s with FTPS.
I also have opened and official ticket --> NETGEAR Support Case #25479470, but it seems that the official support is "playing" with me. A second level technician called me and connected to my PC/NAS with a team_viewer_9_session. He just check that the problem is real. Now it is scaled to 3rd level, but they have asked me for full remote access 24 h, obviously I have said NO. I am not allowing no one entering my pc without me being in site to see what is being doing.
Please, any help would be great.
Greetings
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: FTP Server - No more than 11MB/s if FTPS is activated, without FTPS I get 80-90 MB/s
@clamatac wrote:
I also have opened and official ticket --> NETGEAR Support Case #25479470, but it seems that the official support is "playing" with me. A second level technician called me and connected to my PC/NAS with a team_viewer_9_session. He just check that the problem is real. Now it is scaled to 3rd level, but they have asked me for full remote access 24 h, obviously I have said NO. I am not allowing no one entering my pc without me being in site to see what is being doing.
If I have a chance I will confirm FTP speed. Though I'm surprised by your 90 MB/s result with the RN100 series. I've never seen anything close to that with my RN102.
FWIW, Netgear often does need remote access to troubleshoot problems. I've let them diagnose mine a couple of times (perhaps I am more trusting than you). You could counter-offer to install putty on the PC, and have them diagnose the NAS over teamviewer.