This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
My ReadyNas 212 is running extremely slow. Last time i just did the update and it solved the problem. But this time there is no update. My Antivirus is off and it has been working very fast recently. What is the best way to run a speed test on the transfer speeds of the NAS?
These were my speed test results. It seems like an average pf 72 mb/sec is a pretty good speed and yet our system runs so slowly. As an example, it took about 10 minutes to open a small PDF.
These were my speed test results. It seems like an average pf 72 mb/sec is a pretty good speed and yet our system runs so slowly. As an example, it took about 10 minutes to open a small PDF.
You should be getting speeds in the 100 MB/s range - and you are sometimes, but then you see the big drops (for example the 10 MB/sec test above). Was anyone else accessing the NAS when you ran the speed test?
I don't see any erros in those logs. The readycloud.log had hundreds of errors, but not sure if that is linked to the slowness? I don't need access to the cloud as much as i need my local network to be functional and fast. Thank you so much for taking the time to help me out, i'm a little bit of a noob when it comes to the NAS.
So just running through some of the more obvious issues that could be causing my slow speeds, i switched out the Cat 5e to a Cat 6 and these were the speeds i got. The ones before were going as low as 10mb/s. So hopefully i had a faulty cable. I will continue to runs the speed test and see what i am getting on the new cable.
