Not able to Access Ready Nas Nv

[prkshbn]

Dear All,

I am new to this Community and i hope will get a solution on Netgear NAS issue.

I have a Dozen of Nas boxes all are working fine except this one .
This one was working fine before,We kept this off for a long time and day before yesterday i Switched it on nothing is working.

Problem:Not able to access Share as well as the HTTPS setup.It asks permission to connect share but the setup page says problem loading page.

Things i did to fix:
1.Checked the connectivity,its fine.
2.Tried Connecting share with Nasname\admin and password.(not working)
3.Removed 1 Drive and tried to access(not working)

The firmware is 4.1.8
Please advice if you have any ideas ,
Thanks
Prakash

[StephenB]

Maybe run Raidar and see what status it reports (possibly both disks are corrupted, esp. if the unit wasn't properly shut down).

[prkshbn]

In raidar the status looks fine. All Leds are Green including vol disk.
Its asking for User name and Password to connect the shares.

[prkshbn]

Strange,i have never set a user name and password,Tried using the default user name and password but no luck.

[de_niro]

you may need to reset password of this NAS,please check following link
http://www.readynas.com/kb/faq/boot/how ... n_password

[prkshbn]

I cannot connect to that also,But i haven't changed the password.

[prkshbn]

same problem,problem loading page.
Tried in all this browsers:IE,Mozilla,Opera .

[ewok]

Try using the IP address to connect to Frontview. You will of course need to use your admin login and password. What do you see exactly when accessing Frontview fails?

[prkshbn]

I just cant go to setup,not able to connect.

Regards
Prakash