ReadyNAS 102 on 6.1.8 rsync password config fails #23712

[mrd]

utilite@system-z:~$ rpcinfo -p 10.10.55.223
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 37383 status
100024 1 tcp 53869 status
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100227 2 tcp 2049
100227 3 tcp 2049
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100227 2 udp 2049
100227 3 udp 2049
100021 1 udp 51482 nlockmgr
100021 3 udp 51482 nlockmgr
100021 4 udp 51482 nlockmgr
100021 1 tcp 54985 nlockmgr
100021 3 tcp 54985 nlockmgr
100021 4 tcp 54985 nlockmgr
100005 1 udp 46802 mountd
100005 1 tcp 34530 mountd
100005 2 udp 47096 mountd
100005 2 tcp 45352 mountd
100005 3 udp 54293 mountd
100005 3 tcp 35696 mountd

[mdgm-ntgr]

Sounds like a network issue.

Do you use Jumbo Frames? If so, can you try turning those off?

Can you see if a direct-connection with the NAS works any better (just to try to isolate the cause of the problem)? Note that the NIC is auto-sensing so you can use an ordinary ethernet cable for this (e.g. the one that shipped with your NAS).

[mrd]

I will give that a shot as soon as the rsyncs finish in about 24 hours.

[mrd]

SOLVED!

Rsync:
After a factory default and reinstall with the latest RN102 firmware available in the forums, I created all new shares in the exact same way as the first time and now was able to enable rsync passwords for all shares.

NFS:
It turns out that there was a firware bug with the Netgear Prosafe switch that this NAS is connected to. Netgear JGS524PE
A firmware upgrade resolved the NFS issues.

I appreciate all of the help from the forum, which is what led me in the direction of a possible network problem.

[mrd]

Well... the fun never ends!

I can't enable "Any Host" access to the other shares after having added it successfully to the first share.
I get an "Unknown user name" error message?
I also can not ssh in with ssh enabled. I get an imediate disconnection as soon as the password is entered and I hit return.

Any ideas?

[mdgm-ntgr]

With SSH are you remembering to SSH in as the 'root' user not 'admin'?

On OS6 the root user's password will match the password for the admin user.

[mrd]

Thanks... that got me in and I was able to edit /etc/exports and a reboot allows me NFS access to the desired shares, but the change is not reflected accurately in the GUI.