Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
ReadyNAS Duo V2: SNMP: No Response
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-03-02
09:38 AM
2015-03-02
09:38 AM
ReadyNAS Duo V2: SNMP: No Response
I have enabled SNMP on my ReadyNAS with the following parameters:
Community: public
Hosts allowed access: 192.168.0.10
In SNMPD.CONF on ReadyNAS the following lines are present:
com2sec readonly 192.168.0.10 public
trapcommunity public
If I try to acces SNMP from 192.168.0.10 there is no response:
snmpwalk -v1 -c public 192.168.0.50
Timeout: No Response from 192.168.0.50
I tried also snmpwalk directly on the ReadyNAS but with the same result.
The SNMPD process is running
ps -ef | grep snmp root
root 4838 1 0 08:20 ? 00:00:00 /usr/sbin/snmpd -Lsd -Lf /dev/null -I -smux -p /var/run/snmpd.pid
root 4840 1 0 08:20 ? 00:00:00 /usr/sbin/snmptrapd -Lsd -p /var/run/snmptrapd.pid
I already did an OS reinstall on my device but with no success also.
Do you have any idea why SNMP is not responding?
Thanks, Michael
P.S. There is no local firewall issue on my Linux box. If I do a "snmpwalk" another device (e.g. a Netgear switch) an answer comes back ...
Community: public
Hosts allowed access: 192.168.0.10
In SNMPD.CONF on ReadyNAS the following lines are present:
com2sec readonly 192.168.0.10 public
trapcommunity public
If I try to acces SNMP from 192.168.0.10 there is no response:
snmpwalk -v1 -c public 192.168.0.50
Timeout: No Response from 192.168.0.50
I tried also snmpwalk directly on the ReadyNAS but with the same result.
The SNMPD process is running
ps -ef | grep snmp root
root 4838 1 0 08:20 ? 00:00:00 /usr/sbin/snmpd -Lsd -Lf /dev/null -I -smux -p /var/run/snmpd.pid
root 4840 1 0 08:20 ? 00:00:00 /usr/sbin/snmptrapd -Lsd -p /var/run/snmptrapd.pid
I already did an OS reinstall on my device but with no success also.
Do you have any idea why SNMP is not responding?
Thanks, Michael
P.S. There is no local firewall issue on my Linux box. If I do a "snmpwalk" another device (e.g. a Netgear switch) an answer comes back ...
Message 1 of 2
Labels:
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-03-04
07:04 AM
2015-03-04
07:04 AM
Re: ReadyNAS Duo V2: SNMP: No Response
I found the root cause of the issue.
I needed to change the line
com2sec readonly 192.168.0.10 public
to
rocommunity public 192.168.0.10
and restart the SNMP task with "service snmp restart".
Afterwards I was able to successfully connect via SNMP to that device.
However: It seems that this type of NAS only supports a basic subset of SNMP IDs so that I am e.g. unable to read temperature, fan status, RAID status etc. so for me it does not make sense to monitor it 😞
I needed to change the line
com2sec readonly 192.168.0.10 public
to
rocommunity public 192.168.0.10
and restart the SNMP task with "service snmp restart".
Afterwards I was able to successfully connect via SNMP to that device.
However: It seems that this type of NAS only supports a basic subset of SNMP IDs so that I am e.g. unable to read temperature, fan status, RAID status etc. so for me it does not make sense to monitor it 😞
Message 2 of 2