Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: ReadyNAS NV+ v1 Boot up LED pattern undocumented?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-01-30
07:42 AM
2015-01-30
07:42 AM
ReadyNAS NV+ v1 Boot up LED pattern undocumented?
I can't find this anywhere in my searches.
NV+ has been powered down for a few months until I had time to deal with a dead drive. I've tested all drives and only one is bad. Now when I try to bring it up, I get:
Power light briefly lights
Almost immediately the disk LEDs cycle back and forth and don't ever stop. LED display is blank.
When I say back and forth, LED 1 and 2 come on together, then it blinks over to LED 3 and 4 on together. Back and forth indefinitely.
Replacing the dead drive doesn't help.
Don't want to repair/replace the NV+, moving the disks to a current one isn't an option without losing data, and scared to put the degraded array in my old original ReadyNAS 600.
I just want to get this up long enough to pull the data off and retire from ReadyNAS or move to a newer model. HELP!
NV+ has been powered down for a few months until I had time to deal with a dead drive. I've tested all drives and only one is bad. Now when I try to bring it up, I get:
Power light briefly lights
Almost immediately the disk LEDs cycle back and forth and don't ever stop. LED display is blank.
When I say back and forth, LED 1 and 2 come on together, then it blinks over to LED 3 and 4 on together. Back and forth indefinitely.
Replacing the dead drive doesn't help.
Don't want to repair/replace the NV+, moving the disks to a current one isn't an option without losing data, and scared to put the degraded array in my old original ReadyNAS 600.
I just want to get this up long enough to pull the data off and retire from ReadyNAS or move to a newer model. HELP!
Message 1 of 3
Labels:
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-01-30
07:56 AM
2015-01-30
07:56 AM
Re: ReadyNAS NV+ v1 Boot up LED pattern undocumented?
Is this what you are looking for: http://www.readynas.com/download/docume ... AS-LED.pdf
Looks to me like it might be a memory test failure. Maybe try reseating the memory.
Looks to me like it might be a memory test failure. Maybe try reseating the memory.
Message 2 of 3
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-01-30
08:55 AM
2015-01-30
08:55 AM
Re: ReadyNAS NV+ v1 Boot up LED pattern undocumented?
That document looks familiar, but I'm going on 10 years with ReadyNAS so no wonder I couldn't find it. Thank you so much!
Message 3 of 3