NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Blocking websites - no whitelist capability without Armor???
I've just purchased and installed an RBE371. Current firmware. After a couple of days, I disabled Armor because it was blocking a LOT of websites incorrectly. Now I find that my router is still blocking some websites, and I cannot find any way to unblock these. I presume I could reactivate Armor and unblock them, but that is not an acceptable solution. I have looked in both the Orbi app and in the router web login. No joy in either place. BTW, I have confirmed that the problem is with the Orbi product by connecting my PC and phone to another Internet connection (hotspot on my phone, with my phone's WiFi turned off). There are ZERO problems when I bypass the Netgear product(s). I have also ruled out DNS problems by trying various public DNS servers. (e.g., OpenDNS and others.) Can anyone tell me how to whitelist websites without Armor turned on? Does such a feature exist? Thanks for any help you can offer. (BTW, I'm a telecom engineer. I understand how this stuff works, so I have not gone into exhaustive technical detail. It's not needed. Let's keep it simple - I just need to whitelist blocked sites.)RBR750 Wi-Fi intermittently goes out, wired connection is fine
Currently running the latest firmware per the Orbi app (v7.2.715). The wifi network from my Orbi router will go out for 30 mins to several hours a couple times a week. This started happening a couple months ago after flawless connectivity for almost two years. I have AT&T fiber, and the gateway shows an internet connection during these outages. The settings on my fiber modem/gateway have not changed since I started using my Orbi , and my Philips Hue bridge, which is connected to my Orbi router via ethernet, works fine during these wifi outages. Any ideas on what could be the problem? The connection resolves itself most of the time, but I've had to occasionally power cycle the router when I don't feel like waiting.RBR860 2.4 GHz channel Stopped Working
A few days ago, All three routers started showing a solid Magenta light. I rebooted several times and now all three show no light other than the green LED light on the back. More importantly, since then it has stopped brodcasting on the 2.4 GHz band. In the app, under Advanced setup, it does show that bans as being enabled. I am perplexed. Any ideas?Orbi 860 mesh with 3 satellites devices failing to reconnect after router reboot.
I have a lot of Shelly devices about 90 odd. All smart home devices are connected to the LoT wifi, all have DHCP reserved addresses, had to do a reboot of the router after adding a reserved address to the DHCP list, the router came back up, 3 of the 4 satellites reconnected albeit they took a while, the 4th would not connect, ended up having to power cycle that unit. Found 70% of smart devices would not reconnect, even iPhone and MacBook were connecting to main wifi the disconnected the connected and then disconnected again, took a long time to stabilise, only way I could get the Shelly devices connected again was to disable the LoT wifi for 5min the enable it again then the started reconnecting. Just power cycling Shelly devices was not enough. Very frustrating. Any ideas on why this could be happening. Just bought this orbi system and already regretting it.Orbi960 Frequent Internet Disconnection
Hello All, I have been using Orbi960 since 2 years without any problem and works like a charm. From 23 May 2025, I am facing frequent internet disconnection, Internet disconnects very 5 to 10 min and then comes back. My Setup. 1 RBRE960 connected to ISP modem (1 Gbps speed) (placed in living room) 1 RBSE960 connected to RBRE960 Wired Backhaul (placed in bedroom) The backhaul connection status shows good The devices connected to RBRE960 in the living room get good internet connection and never drops out and works fine. However all the devices connected to the RBSE960 place in the bedroom frequently gets disconnected and drops internet connection. When i move my cellphone from bedroom to living room it gets connected to the RBRE and works well. I thought it might be some problem with the RBSE960 and i swapped wit with my second spare RBSE960 (wire backhaul) but the problem persisted. I changed the backhaul network cable, still did not resolve the issue. Rebooting the system solves the problem temporarily, but surfaced 30 min later. I am stuck now dunno what to do. I believe the recent firmware update is causing the issue, not sure. 4 years back had the same issue with RBK50, worked well for 2 years, then same problems started and replaced with RBK960. Looks like some inherent problem with Orbi systems, Any support i this regards is much appreciated Sujay