NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Netgear r7900p not producing gig speed at router
So my local ISP recently upgraded me to Gig speeds. I have a Arris surfboard modem that is getting gig speeds however my router will not produce these speeds at the ports. wifi 5ghz is 240mbs at best hardwired - cat6 cable - 450mbs now i know cable internet can fluctuate, I was just hoping for better speeds especially over wifi. thanks for your timeProduct recommendation for an RV AP with Wi-Fi backhaul.
Hello, I am looking for an AP for my RV that would allow for Wi-Fi backhaul to another local AP. It needs to have an external antenna connector or a removable 2.4 or 2.4/5 antenna. I am thinking that a range extender could work but I would prefer to have my own SSID. A Mesh system would only work if the far AP was the same product. Do most AP's allow for non wired backhaul? Possibly one solution would be a range extender to the far AP along with a local AP using the extender's link as backhaul. ?R6700v3 went to reset now makes weird noise and lights aren’t on
So more detail went to reset cause the wifi went out and when I went to plug it back in it started whirring noises slightly as I plugged it in then when turned on got louder lights flash I tally when turned on but other than that nothingNetgear EX6150v2 Not Connecting to TMobile TMO-G4AR Router
Hello all, I am having issues setting up my Netgear EX6150v2 on my TMobile WiFi network using a TMO-G4AR router. Since I don't have a WPS button on my router, I started setting it up as instructed in extender mode through the Netgear installation assistant. I'm able to get all the way to the final steps of connecting my devices to the newly created extension networks, but I always get a "Could not connect the extender to the existing network" message, and the Router LED link never turns on. I'm not sure what's causing the hangup. I am 100% certain that I used the correct password for the existing network, and I have attempted a factory reset and reconnect to no success. Does anyone know if this is a user error, extender problem, or if my router is not compatible with this device? Thanks for the help,5Ghz wifi not working
Hi all, Im having an issue with AX6000 router. Couple of days ago my 5ghz wifi network suddenly disappeared, i tried rebooting the router but it didn't help. I've reached out to customer support and tried following troubleshooting steps: - Reseting the router to factory settings - Renaming wifi connection - Downgrading firmware and upgrading it back - Changing wifi channels - Enabled 5ghz guest network with & without security - Result: "Cant connect to this network" None of those helped. Just few moments ago i performed hard reset of the router and even though the network is now visible my devices connect to it for a brief moment and then the connection is dropped. Before hard reset i was able to connect to network from my phone but there was "no internet connection" while my laptops were either unable to connect "Cant connect to this network" or it was not visible to the laptops at all. Current firmware is: v1.0.10.140 Is there anything else i can try?EAX20 extender issues
I have a Nighthawk RAX80 router and a AX1800 Mesh Extender EAX20 extender, it is connected however i am noticing that it will randomly lose connection to either the 2.4 ghz or the 5 ghz signal from time to time. Rebooting doesn’t bring it back, i have to go through the whole setup process again on the extender to get it back to normal. There is a nearby active ethernet port that is connected to the router, would i be able to connect the extender to ethernet rather than wireless meshing and still keep it in extender mode with One WiFi activated? Nighthawk RAX80 - Firmware Version V1.0.10.140_1.0.79 AX1800 Mesh Extender EAX20 Firmware Version: V1.0.1.64_1.0.104Nighthawk AC4000 3x3 tri band WiFi Router—going off and on with ATT fiber Giga, mainly Apple devices
Hi, my router has 4 years and since some time already, the internet goes off and disappears from the WiFi list of available networks on Apple. I reset quite often the fiber, modem, router boxes. Problem remains. ATT has this security free service (firewall?!?!) turned ON, could it be the problem? Should I switch it OFF? I believe I had donde that too and no big difference on R8000P going OFF and ON, irresponsiveness. Thank you