NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
R8000P
2 Topics
R800P forward ports disappearing!!
Router: R8000P just purchased Firmware Version: V1.3.0.10_1.2.2 I have setup and reflashed this router 5 times now. It works great but for one thing. The port forwarding page will randomly show up as blank after setting up all the ports or even in the middle of setting them up. If you try to readd a port, an error of Port already in service will show up. Nothing resets it.... Even a reboot does not bring them back. The only thing that will work for a time is to reflash the firmware. Then the ports will show up but will eventually disappear. Different settings I have tried based on the crap ton of other people having the same issue: 1. Set WAN IP to static from DHCP. (Still the ports will disappear eventually) 2. Disable UPNP. (Still the ports will disappear eventually) 3. Reflash older firmware. (Still the ports will disappear eventually) Settings: A. All wifi radios are enabled. B. Dynamic DNS is setup. I have left this blank and it will still occur C. Disable Port Scan and DoS Protection is checked D. Respond to Ping on Internet Port is checked E. Disable IGMP Proxying is checked F. NAT filtering is set to open G. Disable SIP ALG is checked. What else do you need to know because this is totally unacceptable on a $400 router. After messing with this for 5 firmware reloads, I decided to save a config file. After a restore of that exact same config... They show up now but will disappear soon enough I am sure. Thanks, NateSolved4.7KViews0likes4Comments