NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
problem
21 Topicsethernet leds are amber netgear prosafe GS748T
Hi, I hope somebody help me. We have a switch netgear ProSafe GS748T, and suddenly, the leds that indicates if any port is occupied are amber, even if the port is empty, and they don't blink, all of them are in amber and fixed, but the funny thing is that all our pc's in our lan still have access to the internet and to the lan, what could be the problem? I will appreciate your answer. Thanks for all.SolvedN300 keeps disconnecting
Hey guys, I've set up my router as an access point for my house. It works for 12 to 24 hours but then disconnects from my modem. I've been searching for days but coudn't find the issue. Maybe some of you have an answer? My router is running the latest firmware and is connected to the modem via a powerline model PL1000.SolvedReadyNAS - Remove inactive volumes to use the disk. Disk #1,2.
Hi, I have 2 SATA 2TB drives. When I login to the NAS I get: Remove inactive volumes to use the disk. Disk #1,2. I've double checked to ensure there are no USBs etc plugged into the machine. I've upgraded the firmware to the latest (6.7.4) The drives have re-synced however there are 2 RED HDDS showing when I look in "Volumes" I have the chance to format the drives however I don't want to as I have data on there that I can't lose When I look at the lights, there are 2 solid blue LED lights on each hard drive number. Thanks9.4KViews1like19CommentsNetgear Nighthawk M1 Portforwarding Issues
I recently bought the new Nighthawk M1 4G LTE Mobile Router in an 80GB plan from Telstra, everything works well so far, I'm getting at lowest 50mbps, -land so far at highest ~120mbps, either way I'm happy with speed - however I cannot get the port forwarding function to actually work nor UPnP. I'm trying to use it to host a server from a computer. The computer has always worked fine however I need it to work on the Nighthawk M1. I know there's nothING wrong with the computer setup or the server setup as it works normally on any other Netgear router, but it won't work now. I have tried adding the ports in the portforwarding section, I've tried enabling DMZ, and it just won't work. I'm not sure why not. ANY help or advice is definitely wanted! Thanks in advance :)Losing Wireless Connectivity
Hello guys, So basically the first few days the Orbi system worked just fine. But now I'm losing the connection every 1/2 hrs. I'm connected via Lan-Cable to my PS4. I don't know if it has something to do with my issue but when I was only using the laptop and my iPhone everything worked fine. I did not change any settings etc. Once I lose connection the router is pulsing white and sometimes it's just solid white. Then it turns blue and everything works again. Any ideas how I could solve this? I don't want my router to lose connection. Especially when I'm playing online games.R6400 Weak Power, low range
Hi all I have bought the R6400 to reach all rooms in my house. Sadly, the router from the internet provider has more range and power even if it is standing a floor below. Furhter, the R6400 is unable to get through more than one room or into another floor. (Trough a wood ceiling!!, Not an army shelter) I have the Wlan power on 100 %. If I am right there are three possibilities: Either the router is defect or Netgear is promising ******* or I made a mistake. I would be thankfull if somebody know an answer. FW: 1.0.0.26_1.0.14 Best RegardsSolvedLB1121 POE???
I submitted a support ticket over a month ago about this and still no answer/fix. The LB1121 will not restart via POE. I have used a Ubiquiti POE injector and a T-Link POE injector with the same results. Sometimes the injectors will power the divice, sometimes they won't and I get no power. I have had a LB1121 running for weeks at a time off the Ubiquiti 48v POE injector with no problem at all. If I unplug the ethernet cable and plug it back in, it will not restart. It works flawlessly off the 12v wall plug every time. But if I try to switch it to POE, nothing. After an unknown amount of time(days) of it sitting unplugged on my desk, it will all the sudden work again via POE. The entire senerio makes no sense. I can not find any patern to the problem....sometimes it works, most of the time it doesn't. I have already RMA'd my first unit and the replacment has the same problem. I have resorted to purchasing a 2nd LB1121 to keep as a backup for when I lose power or something. I have an extra to rotate in. They both have the same POE restart problem. Pretty annoying to say the least! That is a total of 3 LB1121 units I have had that all have the same issue. There is literally zero documentation about the POE standard used for the LB1121. Is it passive poe, is it 802.3at or af or what? Its a mistery because Netgear doesn't povide any information and their tech support has no answers. What voltage is required for the LB1121 to start via POE? How may amps does the LB1121 use? What specification are required for a POE injector that is compatible with the LB1121? Providing some detailed POE requirements for your product would probably go a long way! It seems crazy that Netgear doesn't even know what POE standard their own device uses. Its also crazy that Netgear would sell a POE device that doesn't work properly with the most common POE injectors available! Super annoying! Will we see a firmware update for the LB1121 anytime soon? a. Fix POE problems stated above. b. Fix "passthrough" mode so its not on a p2p /32 link so we can use real routers. c. More LTE band settings. It would be nice to be able to force bands, etc.RN202 connection does not accept username/password
Hi, I just started using a new RN202. Setup works fine, Updated to the latest firmware version. I created a folder and want to connect using a drive letter form my Windows 10 desktop. The first step works fine, it accepts the share name: //Nas2/media/Gebruikers For the share I switched on SMB and anonymous access The Windows asks for a "reference" user and password I tried to: a) ignore it b) use the admin username and password c) create a user,and enter that username/password tried my windows username (not password protected) Nothing seems to work. How do I get access? It is nowhere described in a simple way in the software manual. I want anonymous access without password. So, not very happy at the moment. This takes far too much time. Hope someone can help me out. Thanks in advance. RudolfSolvedInstallation Problem setting up Orbi with ATT DSL
Hello, I picked up a 3 pack Orbi system from Costco today and got it home to install it and am running into issues. I was able to go through the setup procedure and everything seemed to pair fine (both satellites) but it was showing 'no internet access' so I made sure it was set to PPPoe and made sure correct username/password... and now the 4 'boxes' on the setup and advanced setup page are showing green check marks, but the internet on my devices still does not work. I have been able to successfully setup routers in the past without any sort of incident, and cannot seem to figure out what in the world is going on here. I will append some image links showing the status icons I'm seeing, but wondering if anybody has run into anything similar themselves? (The only thing I'm not entirely sure about was whether I needed to put Mac Address in manually, I left that part default, but everything else I am 99% sure is setup correctly) (Also on the internet connectivity thing it shows 1d 0min 0seconds ago) - but it doesnt count forward which makes me think its getting an ip address for just a moment but not maintaining it???) Any advice would be hugely appreciated. Thank you, I will follow up to this post soon with images.SolvedTransmission 3.00.6 problems
Hi all. I would like to ask for help from you all. My transmission is acting very wired: First - The installed version is shown in my admin page 3.00.6, but when I am in the application it is showin 2.82 Second - When I check available free space in my admin page it show 3.65TB but in the transmission 4.01TB Third - The newly downloaded folders doesn't get date when it is finished in the downloaded folder. The version of my Readynas 104 is 6.4.0 Printscreens: