NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
TedW
Aug 10, 2017Aspirant
Global L2 Loop Protection question on M4300-52G-PoE+
I was testing the L2 Loop Protection capability of my M4300-52G-PoE+ stack by connecting ports 4/0/1 and 4/0/5 together, and the protection seemed to work great, putting port 4/0/1 in a D-Disable state.
My question is, after correcting such a state by disconnecting the loop, how do I go about taking the port out of a D-Disable state and putting it back into an Enable state? I see no option to reenable the port via the browser GUI under Switching -> L2 Loop Protection and I'd like to know if the only way to renable the port is to completely reboot the entire stack?
Thanks,
TedW
Nevermind. After doing some additional digging, I found the option to reenable the port under Switching -> Ports, so I was able to answer my own question.
2 Replies
- TedWAspirant
Nevermind. After doing some additional digging, I found the option to reenable the port under Switching -> Ports, so I was able to answer my own question.
- JohnC_VNETGEAR Moderator
Hi TedW,
Thank you for sharing the solution to the community! We look forward hearing more solutions and being helpful resource in the future!
Regards,
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!