RN104 Slow Performance since 6.7.4

Actually... it was just slow after 6.7.5 as it was updating the AV.

It seems to have fixed the 6.7.4 'slowness'.

-G

Hello there,

I am also experiencing very slow transfer speeds (6-7 MB max). I am not 100% sure, but I aslo think it started around after I updated to 6.7.4 on June 3rd. Updated to 6.7.5 today but no change. I have checked cables and stuff, did a few restarts and tried various files.

My ifconfig reports 1 Gbps speed on the eth1 adapter:

Settings for eth1:

Settings for eth1:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
                                             1000baseT/Half 1000baseT/Full
        Link partner advertised pause frame use: Symmetric Receive-only
        Link partner advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 1
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Link detected: yes

Also tried it from different computers, no difference.

Any ideas how and what I can check?

Thanks,

Alex