RN104 Slow Performance since 6.7.4

Question

I upgraded to 6.7.4 on June 19th, and since then accessing anything (ReadyNAS Suirveillance) or the device itself has been really slow. I update to 6.7.5 today and the problem persists, though not as bad.

I've check the logs, and there's been no errors in the last few months other than the AV failing to update a while ago.

Any ideas? I did a restart for just in case, but no real change.

-G

Brannor · Answer

Actually... it was just slow after 6.7.5 as it was updating the AV.&nbsp;It seems to have fixed the 6.7.4 'slowness'.&nbsp;-G

StephenB · Answer

Good to hear. &nbsp;Let us know if the performance drops off again.

azerva · Answer

Hello there,&nbsp;I am also experiencing very slow transfer speeds (6-7 MB max). I am not 100% sure, but I aslo think it started around after I updated to 6.7.4 on June 3rd. Updated to 6.7.5 today but no change. I have checked cables and stuff, did a few restarts and tried various files.&nbsp;My ifconfig reports 1 Gbps speed on the eth1 adapter:&nbsp;Settings for eth1:Settings for eth1:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
                                             1000baseT/Half 1000baseT/Full
        Link partner advertised pause frame use: Symmetric Receive-only
        Link partner advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 1
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Link detected: yesAlso tried it from different computers, no difference.&nbsp;Any ideas how and what I can check?&nbsp;Thanks,Alex

evan2 · Answer

Please run top command, check CPU and memory loading,
also try to disable IPv6 in NAS admin GUI-&gt;Network-&gt;eth0 or eth1 setting.

StephenB · Answer

Also, I suggest using NasTester to test the speed (from a Windows PC that also is using gigabit ethernet). &nbsp;http://www.808.dk/?code-csharp-nas-performance
&nbsp;
Then we compare performance with others here.

Forum Discussion

RN104 Slow Performance since 6.7.4

10 Replies

Related Content

formatting my netgear rn104

RN102 slow performances

ReadyNAS RN104 Drive degraded, ATA error

ReadyNAS RN104 fresh setup to replace Seagate NAS

rn104 network issue

NETGEAR Academy

ProSupport for Business