NightHawk x10 r9000 wifi dropping issue post f/w update

[rmsarma]

f/w updated to 1.0.2.32 otw, now i have wifi connection issues keeps dropping every few minutes, any suggestions

[FURRYe38 · Accepted solution]

I recommend doing a factory reset, manually loading the FW file, factory reset then set up the router from scratch using IE11 or FF. 

Any wifi neighbors near buy? How many and what channels are they using? 

[FURRYe38 · Accepted solution]

I recommend doing a factory reset, manually loading the FW file, factory reset then set up the router from scratch using IE11 or FF. 

Any wifi neighbors near buy? How many and what channels are they using? 

[Mighty_Putty]

Can you verify if your WiFi (and wired if applicable to your environment) connections are dropping as a result of your router rebooting?  Myself and another user are experiencing this issue, and what I've discovered is that disabling Dynamic QoS has restored stability to the R9000. 

[rmsarma]

I am not sure why the factory reset was needed, but that seemed to have improved the wifi connection issues, there is no change to my wifi surroundings and 

my config below

2.4 ghz AUTO(8)

5 ghz (153)

60 ghz (2)

 I did not load the F/w file as the device indicated that it was already updated

[rmsarma]

Dynamic QOS is disabled, al devices are wireless except my ooma wired to the router

[FURRYe38]

Hope it works well. Enjoy.