Orbi WiFi 7 RBE973
Reply

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

FURRYe38
Guru

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Can you all re-check this? I got word from NG that this was fixed on there side. 

Message 51 of 64
aprayiii
Star

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

I am still having the issue and I have an active ticket open with Netgear and they are troubleshooting.

Message 52 of 64

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Already on the newer firmware, still get the MD5 error for the GUI language update.  Have a case open with NG they wanted me to factory reset the thing, figure I'll try it over the weekend.

Model: R7800|Nighthawk X4S AC2600 Wifi Router
Message 53 of 64
aprayiii
Star

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Me too... but they have not yet asked me to factory reset. Please let us know if that works 🙂

Message 54 of 64
FURRYe38
Guru

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

I'll be trying this as well...

Message 55 of 64
dhe
Guide
Guide

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Still no luck, I'm afraid. Currently running firmware version V1.0.2.84 and GUI language version V1.0.0.422, and the Firmware Update Assistant is still giving me the MD5 verification error. Unfortunately the FUA shows here both updates on the same page and doesn't provide any means to select one of them individually, so there's no way I can tell which of the two actually causes this.

Model: R7800|Nighthawk X4S AC2600 Wifi Router
Message 56 of 64
FURRYe38
Guru

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

OK thanks for letting us know. I got same as well on v.90...still happening. I've passed this on to NG. 

 

Message 57 of 64
FURRYe38
Guru

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Everyone,

Please factory reset your R7800 router and walk thru the setup wizard. The GUI should update correctly now:

DuringGUIUpdate.png

PostGUIUpdateInstall.png

Mine updated with out error today. 

Message 58 of 64
aprayiii
Star

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Wooohooo! Mine worked correctly. And BTW I did NOT have to do any sort of reset, just went to the update and it worked fine from a Chrome session connected wirelessly. 

Message 59 of 64
FURRYe38
Guru

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Glad it's working. Please mark your thread as solved so others will know. Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/24231/How-do-I-back-up-the-router-configuration-settings-on-my-Nighthawk-rout...
Enjoy. 📡

 

Message 60 of 64
aprayiii
Star

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Thanks! Done!

Message 61 of 64
FURRYe38
Guru

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

👍

Message 62 of 64
dhe
Guide
Guide

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Successful dual update of firmware (V1.0.2.84 to V1.0.2.90) and GUI language (V1.0.0.422 to V1.0.0.425), via the Firmware Update Assistant 🙂

 

Like @aprayiii, no factory reset was needed in my case.

 

Many thanks for your support!

Model: R7800|Nighthawk X4S AC2600 Wifi Router
Message 63 of 64
FURRYe38
Guru

Re: Nighthawk(R) X4S R7800 MD5 Verify Error

Glad it's working now. 

Be sure to save off a back up config to file for safe keeping.

 

Enjoy. 😊

Message 64 of 64
Top Contributors
Discussion stats
  • 63 replies
  • 12784 views
  • 27 kudos
  • 8 in conversation
Announcements

Orbi 770 Series