Reply

Re: R7000P - Why does the internet led blink amber

Rakenet
Aspirant

R7000P - Why does the internet led blink amber

 
Message 1 of 5
FURRYe38
Guru

Re: R7000P - Why does the internet led blink amber

Could be the ISP services or the ISP modem. 

Would need more information.

Read the user manual for what the LED colors mean on the router.

 

What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended. 

 

Have the ISP check the signal and line quality UP to the modem. Be sure the ISP provisions the modem correctly.
Be sure there are no coax cable line splitters in the between the modem and ISP service box. 
Be sure your using good quality RG6 coax cable up to the modem. 
Be sure to power OFF the modem for 1 minute then back ON.
https://community.netgear.com/t5/Cable-Modems-Routers/General-info-and-Troubleshooting-for-Cable-Mod...
https://kb.netgear.com/24311/Power-level-guidelines-for-a-NETGEAR-cable-modem-router?article=24311
https://www.duckware.com/tech/solving-intermittent-cable-modem-issues.html

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Mode Mode  | Wifi Router RBK963 and RBK853 Router mode | Switches NG GS105/8, GS308v3, GS110MX and XS505M | Additional NG HW: C7800/CAX3/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, R7000, R7800, R7960P, R8000, RAXE500, RAX120v2, RAX50v2, XR450/500/700/1000, EX7500/EX7700

Message 2 of 5
Rakenet
Aspirant

Re: R7000P - Why does the internet led blink amber

No explanation in the manual for color of "internet led". I can receive internet directly from the modem and I have tried different cables from modem to router. 

Message 3 of 5
FURRYe38
Guru

Re: R7000P - Why does the internet led blink amber

Page 10:

https://www.downloads.netgear.com/files/GDC/R7000P/R7000P_UM_EN.pdf

 

What Firmware version is currently loaded?

What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?

 

Has a power off for 1 minute then back ON with the ISP modem and router been performed since last update?
Be sure to restart your network in this sequence:
Turn off and unplug modem.
Turn off router and computers.
Plug in and turn on modem. Wait 2 minutes for it to connect.
Turn on the router and wait 2 minutes for it to connect.
Turn on computers and rest of network.

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Mode Mode  | Wifi Router RBK963 and RBK853 Router mode | Switches NG GS105/8, GS308v3, GS110MX and XS505M | Additional NG HW: C7800/CAX3/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, R7000, R7800, R7960P, R8000, RAXE500, RAX120v2, RAX50v2, XR450/500/700/1000, EX7500/EX7700

Message 4 of 5

Re: R7000P - Why does the internet led blink amber

A bit more explanation than a blank message might be good. Otherwise we are all flailing around.

 

Maybe the cookie monster ate you connection.

 

 

Just another user with a set of boilerplate macros.

My network DM200 -> R7800 -> GS316 -> PL1000 -> Orbi RBR40 -> Orbi RBS50Y -> RBS40V
Message 5 of 5
Top Contributors
Discussion stats
  • 4 replies
  • 360 views
  • 0 kudos
  • 3 in conversation
Announcements

Orbi WiFi 6E