× NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Orbi WiFi 7 RBE973
Reply

Re: GS308E Error : Plus Utility Verwaltung ist derzeit deaktiviert (Management is currently disabled

NESCH52
Tutor

GS308E Error : Plus Utility Verwaltung ist derzeit deaktiviert (Management is currently disabled)

When trying to connect to my recently new bought GS308E via my HOME-LAN firsttime, iv'e got a strange errormessage back from ALL NETGEAR-Tools (SCC, still available on my Win 11x64 Laptop, saying: "Management is currently disabled". In addition i could not get into the Online Menu of the GS308E as described, allthough i switched my Laptop-Ethernet-LANCARD to the requested IP range of this Netgear 8-Port-managable Ethernet-Switch! No Telnet access nor FTP or any Firmware-Upgrade possibile, from the WEB shown version

v.1.00.08. to a possible version 1.00.11GR via Switch Discovery Tool or similar NETGEAR-Tools.. In addition , the Menu does not accept the change of the switch internal own IP

192.168.0.293 to any other IP. How to solve this MANAGEMENT-RESTRICTION ERROR

to a working one? Plse. can anybody help please? best regards 

Message 1 of 5
schumaku
Guru

Re: GS308E Error : Plus Utility Verwaltung ist derzeit deaktiviert (Management is currently disabled

Along with all newer Plus switches for longer than a decade, SCC (introduced before Web UI made available for the configuration) was replaced by the  NETGEAR ProSAFE Plus Configuration Utility. Both are no longer supported and obsolete, except for certain special purposes and legacy systems.

 

As part of the security updates, the management by the NSDP protocol was disabled by default another ten years ago already, so only some basic discovery feature remained.

 

Switch Management Mode.PNG

 

Please consult the https://www.netgear.com/support/product/gs308e.aspx#docs documentation on how to install and configure these switches.

 

At your own risk, you can consider to re-enable the Plus Utility management protocol, and try your luck with the Plus Utility as long as it's workable.

 

IP addresses to these switches can be assigned by DHCP from your router. Consider adding DHCP-MAC reservations for all these devices so they will be reachable on the IP address assigned.

 

Worst case, for a single switch on the default IP address, temporary set your computer network adapter to the 192.168.0.x/24 subnet, and define a fixed IP on the device.

Message 2 of 5
NESCH52
Tutor

Re: GS308E Error : Plus Utility Verwaltung ist derzeit deaktiviert (Management is currently disabled

Thanks for the reply , I've tried out the last hint, fist: "Worst case, for a single switch on the default IP address,

temporary set your computer network adapter to the 192.168.0.x/24 subnet, and define a fixed IP on the device."

But even though i was them in the same IP-Range 192.168.0.230(static ,IP4,in Adapter, Subnet 255.255.0.0)

i could not get into any menu to switch the IP ! Still the same primary declared response.  

NETGEAR Switch Discovery Tool 1.2.103 and  ProSAFE Plus Utility v.2.7.8

can both find the switch, but cannot  get into  menu,change any internals no change or upload a newer firmware.

Any possibility of a factory reset , maybe helps? best regards nesch52

Message 3 of 5
schumaku
Guru

Re: GS308E Error : Plus Utility Verwaltung ist derzeit deaktiviert (Management is currently disabled

Hallo @NESCH52 , vielleicht ist es einfacher in Deutsch für beide 8-)

 

Der Vorschlag, auf dem PC eine IP Adresse im Netz 192.168.0.0/24 (nicht .239) zu setzen sollte es ermöglichen das der Switch per IP erreicht werden kann (ping, usw.), wobei /24 einer Maske von 255.255.255.0 entspricht, aber das spielt hier im Moment keine Rolle), dass der Switch mit eine Web-Browser zugegriffen werden kann..

 

Der Switch ist ja noch immer auf der Standard-Einstellung - nicht nur die IP Adresse, sondern auch die deaktivierte Verwaltung per Plus Utility. Daran ändert sich nichts, auch wenn PC und GS308E im selben Subnetzs sind - die Verwaltung mit der ProSAFE Plus Utility wird nicht funktionieren, die Meldung ist also vollkommen richtig, und so zu erwarten. 

 

 

Message 4 of 5
NESCH52
Tutor

Re: GS308E Error : Plus Utility Verwaltung ist derzeit deaktiviert (Management is currently disabled

Case # 46646100 kann als gelöst und geschlossen angesehen werden,

nach folgender Vorgehensweise, die zur Lösung führte:

NETGEAR-GS309 Anweisung zur IP-Umstellung 192.168.0.239.jpg

Kurzform : Die MTU von 1500 hatte an meinem Adapter einen ANDEREN WERT ! .

Der durch "MTU-Optimizer Tool " mit  einer MTU 1492 eingestellt war.

NESCH52_0-1669869146266.png

Dank eines frühreren Hinweises auf die MTU Einstellung

bin ich diese (siehe oben) nochmals komplett für den entsprechenden

Laptop Ethernet Adapter durchgegeangen,

habe nochmals genau die Anweisungen

zur MTU 1500 Umstellung durchgearbeitet.

UND SIEHE DA :

Nachdem  nun die Adaptereinstellung am Laptop

auf IP 192.167.178.0.100 eingestellt waren ,

gelang auch erfolgreich ein WEB-Browser-Login am GS308E

ERSTMALS !!! ES LAG ALSO AN DEM automatisch früher auf

einen niedrigeren Wert optimierten MTU Wert,

mit dem die GS308E NICHT zurecht kam!!!

 Es erfolgte ein manueller Eintrag in die HOSTS Datei am PC

sowie erfolgreiche Passwort & IP- Adressänderung,

wie sie an angehängtem Screenshots sehen können

 

 

NESCH52_1-1669869187864.jpeg

 

 

 

NESCH52_2-1669869187896.jpeg

Vielen riesigen Dank ,

für Alle, die mir hier zur  Lösung des Problems beigetragen haben !!

Besonderen Dank an 

"Marcin Smirski
NETGEAR L2 Technical Expert "

der mich (70 jährig) sehr geduldig & technisch sehr kompetent,

über den gesammten Lösungsweg begleitet hat,

sowie Dank an Alle die Ungenannten,

die mir bis hierher , mit zur Lösung beigetragen haben.

mit freundlichen Grüßen  nesch52

 

Message 5 of 5
Top Contributors
Discussion stats
  • 4 replies
  • 2756 views
  • 1 kudo
  • 2 in conversation
Announcements