This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
I have a build based on HP ProCurve switches. #2 switch has set VLANs as #1 both of them have own internet feeds and are #1 is trunked with #2 in case one of those internet feeds will fail or switches will fail there is still WAN communication from any of those VLANs.
We may need more information of the setup you currently have on these switches. Can you post a simple network diagram that shows the VLANs too and other info that may help?
where on red are marked ports which connect both switches (SW01 and SW02) between. Stack port 1/0/22 is not a real "stackable" as both switches works on their own - just a port with a connection between to "feed" SW02 with the WAN from SW01 porst 1/0/23 or 1/0/24
We're glad to know that the KB articles helped you achieved the setup you needed. If you have more questions please feel free to post a new topic. You can also mark the post as a solution, this will help other users if they encounter the same issue.
