I have two RN10222D ReadyNAS units, one at my home and the other at my office. I have ReadyCloud Windows app installed on my home computer, office computer and laptop. From either home or office through ReadyCloud I can browse through all folders on either NAS just fine. From my laptop when I am away the home device works fine and ReadyCloud reports Connected (VPN). However, my office NAS reports Online (VPN Disconnected). The web interface works fine, firmware is up to date and I tried rebooting the NAS without luck. Also refreshing ReadyCloud doesn't help. Any suggestions? Thanks.
Let me check this with you again. I have some questions below:
What you are saying is using your laptop when away from home and office, you try to connect to home NAS via ReadyCloud and it works fine but when you try to connect to office NAS, that office NAS reports Online (VPN disconnected)?
Using the same laptop, when you are home you are able to access both office and home NAS unit via ReadyCloud?
Are the home and office networks connected to each other via VPN?
What's the Windows version of the laptop?
What's the version of the ReadyCloud app?
What's the firmware version of both NAS units?
When you are away from home and you access these 2 NAS units, what Internet service do you use? Is that a free WiFi, mobile data, etc.
I have the same issue so am going to tag along for the ride if you don't mind?
Background....
3 systems around the UK connected to readycloud seeing shares and working fine.
1 system connects and sees the NAS online (VPN Disconnected) , click the refresh arrows and it thinks about it for a bit and goes back to NAS online (VPN Disconnected).
What was the outcome of this? I am constantly getting the same promlem with users of our NAS in the office. Sometimes it'll work but mostly not. I have to find a solution otherwise I'll have to look at some other way for remote access for my users.
The suggestion was that the user name might be case sensitive but that makes no differance at all! So in answer to you question its still not solved.
This is a big issue for us as we have a large estate of Netgear boxes and I can replicate the issue all over the place! If I can't resolve it soon I'm going have to change to a different make of NAS.
I've heard that suggestion re case sensitivity before but as you said makes no difference at all. It just sometimes works and then stops for some users! E.g This morning I setup a brand new user and work fine at first then stopped, yet I can log on with an old one! I too may have to pull the plug on our 4readynas as I need a reliable remote access solution for my users.
As usual Readycloud logs in and can see the NAS but says VPN disconnected so can't see any shares.
I created a router to router PPTP VPN tunnel between the two sites, click the refresh arrows in the Readycloud software and within a few second connected locally and all working. So that disproves the username case issue. Drop the VPN, refresh the app and back to VPN disconnected.
Another discovery after checking other sites where it is working....... The leaf networks adaptor on a working site is assigned an external IP address once connected and working. On a VPN disconnected site the adaptor is not assigned an external IP but a 169.?.?.? as in it failed to get an IP.
This has also been a constant issue for me since buying two 314s, both of which are situated in a major office building connected to cinenet. Firmware on both has been 6.2.4 since I first set them up.
My personal computer in particular seems to have the worst of it. It used to connect to the backup NAS VPN, but never the primary one (ReadyCloud file access is never a problem). However, it has been months since it will connect to either. I am currently on the beta app mentioned above, have port 6300 forwarded, and have performed multiple reinstalls of Windows 8.1 and 10 in recent months. I've also used a variety of network adapters, and many different Internet connections.
When I install the app on other computers it has no consistent results, usually connecting to only one of them at best. I think I once connected to both through a friend's laptop early on, but the situation seems to have become worse over time.
Restarting the NAS boxes also has no reliable impact on the situation, and neither does turning the ReadyCloud service off and back on.
I also disabled Avast and restarted the app, to no avail.
Any thoughts or suggestions would be very welcome.
Installing the latest release versions of firmware and ReadyCloud client has allowed me to successfully establish a VPN to both NAS boxes at the same time. I had to turn the cloud services off and back on for one of them, but this is extremely encouraging.
Just as a further follow up: At least one NAS still won't establish a VPN connection after it reboots. However, it does always seem to work after then disabling and re-enabling the remote services.
The problem with that (besides being tedious) is that I can only do so if I remote into a local online computer in the office. I may attempt a OS reinstall to see if that resolves it. I would have suspected that's what the firmware upgrade did in the first place though.
Netgear: Any permanent solution to this problem (other than installing some previous beta version)?? People depend on these devices to run a business. Not being able to access them remotely is going to lean people to drop Netgear for another solution. Please provide a solution that works (all the time). I have been following this post for some time and have yet to have a good fix that works all the time. I'm running Windows 10 on a Surface Pro 4.
Which software are you pertaining to? Have you checked the ReadyCLOUD connection or service in the admin page if it's online? Kindly provide more details of the problem so we could help you out.
