This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Hi, I got a readynas duo v1 with the latest firmware.
Currently I'm getting on edge and chrome, when accessing the frontview the message: ERR_SSL_VERSION_OR_CIPHER_MISMATCH.
I could access frontview only with firefox where I could change a setting which forced to accept the browser older TLS versions.
Is there an already a workaround implemented for this issue? I think upgrading the SSL version also requires upgrading the apache modules to a newer SSL version.
Is there an already a workaround implemented for this issue?
Given the age of the linux OS, I don't recommend allowing any inbound over-the-internet connections to this NAS. I haven't seen any posts here by someone who was able add current SSL to their v1 NAS.
As @saudade says, one option is to make a small mod to allow you to reach frontview with http (not redirecting to https). See post 5 in this thread:
I've done this to my Duo V1 and it works fine with Chrome and Edge. I just have to drop the "S" in https:// If you use Raidar and press the "admin page " button, it will call your default browser and use https:// so you'll see the error again. I just bookmarked it to make it simpler.
Is there an already a workaround implemented for this issue?
Given the age of the linux OS, I don't recommend allowing any inbound over-the-internet connections to this NAS. I haven't seen any posts here by someone who was able add current SSL to their v1 NAS.
As @saudade says, one option is to make a small mod to allow you to reach frontview with http (not redirecting to https). See post 5 in this thread:
Thanks @StephenB , @saudade I didn't think about using only http. This way I can access the frontview using edge and chrome. My frontview is only accessible within my LAN.
