Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: Automatic shutdown on drive failure
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-24
09:12 AM
2015-06-24
09:12 AM
Automatic shutdown on drive failure
Is there a way to disable the automatic shutdown when a drive fails?
I know the obvious answer is to replace the drive and re-sync but this process is failing at about 90% which causes the system to crash.
I am trying to get the data off the volume but it either shuts down when the failed drive is missing or crashes trying to rebuild the array.
Thanks 🙂
I know the obvious answer is to replace the drive and re-sync but this process is failing at about 90% which causes the system to crash.
I am trying to get the data off the volume but it either shuts down when the failed drive is missing or crashes trying to rebuild the array.
Thanks 🙂
Message 1 of 11
Labels:
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-24
09:16 AM
2015-06-24
09:16 AM
Re: Automatic shutdown on drive failure
Is this for an NV+?
Go to System>Alerts>Settings then uncheck Power-off NAS when a disk fails or no longer responds. >Click Apply
Go to System>Alerts>Settings then uncheck Power-off NAS when a disk fails or no longer responds. >Click Apply
Message 2 of 11
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-24
09:18 AM
2015-06-24
09:18 AM
Re: Automatic shutdown on drive failure
6speed wrote: I am trying to get the data off the volume but it either shuts down when the failed drive is missing or crashes trying to rebuild the array.
You may want to clone the failed drive. After the cloning process, insert the cloned drive and the data should be fine.
Message 3 of 11
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-24
01:22 PM
2015-06-24
01:22 PM
Re: Automatic shutdown on drive failure
Well, the data likely will be corrupted, but hopefully the bulk of it will be intact.
Ixa wrote:
6speed wrote: I am trying to get the data off the volume but it either shuts down when the failed drive is missing or crashes trying to rebuild the array.
You may want to clone the failed drive. After the cloning process, insert the cloned drive and the data should be fine.
Message 4 of 11
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-25
12:49 PM
2015-06-25
12:49 PM
Re: Automatic shutdown on drive failure
Nhellie wrote: Is this for an NV+?
Go to System>Alerts>Settings then uncheck Power-off NAS when a disk fails or no longer responds. >Click Apply
Yeah, it's a NV+.
You are so the man! You just saved my data.
Message 5 of 11
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-25
01:22 PM
2015-06-25
01:22 PM
Re: Automatic shutdown on drive failure
6speed wrote:
Yeah, it's a NV+.
You are so the man! You just saved my data.
Good to know! 😄
That feature is to protect the data BTW, it shuts down to avoid another failure. Not recommended to be unchecked if you cannot get access to the NAS locally and replace the failed drive.
Message 6 of 11
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-25
02:13 PM
2015-06-25
02:13 PM
Re: Automatic shutdown on drive failure
Ixa, I have two failed drives. How do I l clone the failed drives?
Message 7 of 11
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-25
02:24 PM
2015-06-25
02:24 PM
Re: Automatic shutdown on drive failure
Nhellie wrote: Good to know! 😄
That feature is to protect the data BTW, it shuts down to avoid another failure. Not recommended to be unchecked if you cannot get access to the NAS locally and replace the failed drive.
It's sitting right next to me and I'm backing up all the data that's still good.
Reminder to self. RAID is not a backup and keep your backups up to date. :slap:
Message 8 of 11
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-25
02:37 PM
2015-06-25
02:37 PM
Re: Automatic shutdown on drive failure
muddauber wrote: Ixa, I have two failed drives. How do I l clone the failed drives?
I am not that very familiar with disk cloning. However, here are the instructions:
Use a Knoppix 6.2 Live CD for this guide. Can be found at http://www.knoppix.net
Using dd_rescue command allows you to copy data from one drive to another block for block. This is especially useful for recovering a failed drive. Often when a drive fails, the drive is still accessible, it has just surpassed the S.M.A.R.T. error threshold. dd_rescue allows you to ignore the bad sectors and continue cloning the bad drive to a new healthy drive.
1) Connect your old drive ["failed" disk] and new drive to your PC.
2) Boot up using your Linux live CD.
3) Launch a terminal window.
4) Run fdisk -l to make sure the system sees both of the hard drives.
5) Run hdparm -i /dev/sdx on both of the drives to find which drive is your source drive and which drive is your destination drive.
6) Once you know which drive is which you can start the clone process.
dd_rescue /dev/sdx(source disk) /dev/sdx(destination drive)
7) You will see the process start, just keep an eye on it, it might take a few hours for the clone job to finish, depending on the size of the drive.
Once the process is complete, there will be no notification, the transfer will just stop and you will see the terminal prompt again.
If you see a lot of errors or see that there is no more data being shown as succxfer: it means the drive got marked faulty by the kernel. At this point reboot the system and make sure you know which drive is which again, as it is possible the lettering might switch. Run the dd-rescue command again but this time with -r option. This will start the cloning again but this time will start from the back of the drive and will make sure to get the data that has not been cloned yet.
Message 9 of 11
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-29
12:01 PM
2015-06-29
12:01 PM
Re: Automatic shutdown on drive failure
thanks on the clone option. I'm gonna give it a try
Message 10 of 11
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2015-06-29
11:55 PM
2015-06-29
11:55 PM
Re: Automatic shutdown on drive failure
6speed wrote: Is there a way to disable the automatic shutdown when a drive fails?
Should just need to alter one line in /etc/default/services I think to change this behaviour.
Message 11 of 11