Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: ReadyNAS 314 (6.1.2) will not boot
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2013-09-18
04:03 AM
2013-09-18
04:03 AM
ReadyNAS 314 (6.1.2) will not boot
I am using OS 6.1.2 on my ReadyNAS 314.
Yesterday I tried to remove an app Koken from the apps section of the web interface and it caused my NAS to crash (with the power on).
To turn off the NAS I had to hold down the power button until it turned off as I could not shut it down from the web interface or by pressing the power button on NAS 3-4 times.
On booting the NAS to start up I recived the normal 'Welcome' note and then 'Booting' with a solid LED power button light and then writing appears quickly "CW..." and then back to 'Booting' with a flashing LED power button light.
Raidar does not detect my NAS
From the boot menu;
I have tried an OS Reinstall with no result
I am 50% of the way through a memory test (no failures so far)
I cannot access my NAS via any IP address or by Mapping Network Drive so I cannot access my data.
I am concerned that this will be the 2nd time I may have to do a factory reinstall... can anyone help?
Thanks Chris
Yesterday I tried to remove an app Koken from the apps section of the web interface and it caused my NAS to crash (with the power on).
To turn off the NAS I had to hold down the power button until it turned off as I could not shut it down from the web interface or by pressing the power button on NAS 3-4 times.
On booting the NAS to start up I recived the normal 'Welcome' note and then 'Booting' with a solid LED power button light and then writing appears quickly "CW..." and then back to 'Booting' with a flashing LED power button light.
Raidar does not detect my NAS
From the boot menu;
I have tried an OS Reinstall with no result
I am 50% of the way through a memory test (no failures so far)
I cannot access my NAS via any IP address or by Mapping Network Drive so I cannot access my data.
I am concerned that this will be the 2nd time I may have to do a factory reinstall... can anyone help?
Thanks Chris
Message 1 of 4
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2013-09-18
05:46 AM
2013-09-18
05:46 AM
Re: ReadyNAS 314 (6.1.2) will not boot
I would contact netgear support.
Message 2 of 4
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2013-09-18
06:02 AM
2013-09-18
06:02 AM
Re: ReadyNAS 314 (6.1.2) will not boot
OK thanks will do.
I have to say that I am a little concerned it can crash so easily... are you aware of others having similar issues?
I have to say that I am a little concerned it can crash so easily... are you aware of others having similar issues?
Message 3 of 4
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2013-09-20
04:12 AM
2013-09-20
04:12 AM
Re: ReadyNAS 314 (6.1.2) will not boot
I have spoken to support and they have advised their is a an issue with the chassis as the NAS could not hold an IP address even in Tech Support Mode. I have decided to return the unit and try something different and see how that goes.
Message 4 of 4