NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
LM1200-111NAS firmware
Hello, How can I get a firmware update for the LM1200-111NAS? Attempting to check for firmware update via the admin page gives: Update Error There was a problem updating your device. Please try again later. Attempting to install via file with firmware downloaded from the support site, https://www.downloads.netgear.com/files/GDC/LM1200/LM1200_20.06.09.00_LTE_upgrade_package(US).zip indicates that the firmware is not compatible with the device. Thanks.LM200 Cannot Update Firmware
I recently got an LM200 from Amazon. It connects to LTE and works in bridge and router mode fine. I am trying to update it to the latest FW version to get the WAN failover feature. It isn't able to check for firmware updates online, and when I try to upload the firmware manually, it fails and says "Invalid update file. The package is not supported." Does anyone know why this is happening? I've tried the firmware from https://kb.netgear.com/000064616/LM1200-LTE-Upgrade-Package-Retail-Australia-Europe-and-US and from https://www.netgear.com/support/product/lm1200. Firmware Version:EC25AFFDR07A09M4G App Version:NTG9X07C_20.04.07.06 Web App Version:LM1200-HDATA_03.03.103.189 Hardware Version:1.0 Thank you in advance! (also, there wasn't a LM200 tag but I was forced to pick a tag for this post, sorry if that messes stuff up)The M7 Pro device is unable to connect to the 5G network with the STC provider 2
My M7 Pro is unable to connect to 5G with STC service provider and only works on 4G in Saudi Arabia. We need a solution to this problem. We have contacted support and they have indicated that the issue is a technical problem with Netgear. The problem existed in the M6 Pro and was resolved; we need a solution for the M7 Pro. Model: M7 pro (#MR7400) Firmware Version: NTGX75_10.04. 14.00 Software Version: MR7400-111EUS_00.08 Hardware Version: 10 PRI Version: 00.08 We need a solution JohnPengNighthawk M5 AT&T Looking for APN
For SafeLink Wireless, I pay for the extra unlimited data allowance, I'm also using the Verizon tower coverage, but it shows no signal nothing, when I had the T-Mobile coverage towers and sim variant I was able to get a signal and data coverage. Does the m5 version support Verizon or am I entering the wrong apn settings. I've tried; Name: 1. Safelink, 2. Safelinkvzw, 3. TFDATA APN: 1. RESELLER, 2.TRACFONE.VZWINTERNET, 3. TFDATA PDP: IPV4V6 PDP Roaming: IPV4V6 None are wanting to work.SIM unlock domains not working
Hello, My unlocked M1 connects to my devices, I’m all logged in, and the signal works, but I am prompted to unlock my SIM to connect to Internet. However, the suggested http://attwifimanager and routerlogin domains and IP domain do not load I have cleared cache and done everything suggested. There is no support for M1 on mobile app Any advise would be much appreciated Traveling in ItalyI solved the WIFI name problem with a factory reset
Hello, I have the same problem, I solved the WIFI name problem with a factory reset. But now I want to change the encryption to WP3 and the problem is the same, the "apply" button is disabled. Also I cannot use my standard mobile PW for all my mobile router, because of a special key inside of it. How could that be fixed on the M3?Nighthawk mr5100 vs Ethernet
ATT says I can connect Desktop to Nighthawk via a ethernet cable. Netgear says no. Who do I believe and why. Here is ATT version: How to connect your device to the internet via Ethernet. Connect an ethernet cable from the ethernet port on your computer to the LAN port on the back of the Netgear Netgear Nighthawk 5G Mobile Hotspot Pro. Any help from referees?