NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Nighthawk M5 Ethernet port / data offloading
There's so little documentation about this that I don't can't figure out the best way to phrase my question. If you plug the M5 / MR5200 into a wired switch with it's own Internet access, will the M5 act as an access point? If so... What happens if you wire two M5s together? Could one act as the Internet gateway, and the other as an AP?Mobile Broadband Disconnected M5
Nighthawk M5 5G WiFi 6 Mobile Router (MR5200) working but can't connect to data Your data connection is disconnected. Netgear support and the the provider Vodafone Support say all the settings are good and it should work. But its not working and is becomming a very expensive brick. We dont use it that often but at times we need it. I see alot of other people are having simular problems. I try connecting the Nighthawk router direct to an external erial and if that doesn't work I have to look for something to replace what we have. Is there another mobil router that people recommend that has good support and isn't so expensive.Cant update DC112A to latest Firmware
Hi, When I do a firmware check from within Netgear Genie it says it is the latest (V1.0.0.42_1.0.60) but when I check on the Netgear web site it says the latest is V1.0.0.62_1.0.60 which is 8 updates more. So I downloaded & extracted it & tried to upload it manually it says "This firmware file is incorrect! Please get the firmware file again and make sure it is the correct firmware for this product." Anyone got a fix for this? Thanks Tag Like810s loses signal when docked into DC112a
I know this has been asked before but I can't seem to find the answer. I have several 810s mobile hot spots. I bought a DC112a to extend the signal & added an external aerial & all was fine for a while then all of a sudden no internet. When I looked at the 810s mobile signal strength & the was just a circle with a bar through it. I found if I took it out of the cradle the signal returned so I connected the aerial to the 810s then to the cradle via the USB & again this worked for a while but then did the same thing. Take it off the Air Card & it worked perfectly (Mostly) I tried my spares & they all did the same thing. This is all post 2016 & I am sure all devices are the latest firmware. Upon checking 810 build date is Dec 2019 NTG9X40C_11.14.08.40 & I'm sure I updated the 112 too. I couldn't get it to work so I bought another & without going into it the above happened to the new one. As soon as any of my 3 or 4 810s are placed in the cradle the 810 loses signal. Original it was just too boost the signal but I have a few spare old routers they can be configured into wifi extenders but they need to plug into a LAN point to do this. Has anyone else sorted this out?Using MR1100-100EUS Without SIM Card via Ethernet (WAN Mode)
I am the owner of a Netgear Nighthawk MR1100 (model MR1100-100EUS), currently running firmware version NTG9X50C_12.06.39.00. I would like to use the device without a SIM card by connecting it to a wired internet source via the Ethernet port. However, I cannot find an option in the web interface to switch the internet source from cellular to Ethernet (WAN or Cradle mode). Could you please confirm whether this functionality is supported on my model and firmware version? If so, could you provide instructions on how to enable it? Thank you in advance for your assistance.SIM unlock domains not working
Hello, My unlocked M1 connects to my devices, I’m all logged in, and the signal works, but I am prompted to unlock my SIM to connect to Internet. However, the suggested http://attwifimanager and routerlogin domains and IP domain do not load I have cleared cache and done everything suggested. There is no support for M1 on mobile app Any advise would be much appreciated Traveling in Italy