NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
MH7150 M7 not accepting my eSIM
Hello, just bought a M7 to use a eSIM from Free (working fine on my iPad Pro). Whatever with QR code or manual configuration, the installation of the eSIM is not working. i would like to use it according to the big data associated to it in different countries. as mentioned this is fine on my iPad. Any clue how to make it work ? The M7 is running the latest firmware. thanks for your support ludovic
MH7150 Not receiving text messages
I have the MH7150 (Nighthawk M7) using an eSIM however the device isn't receiving text messages, I have accessed the admin panel through the browser but it is not showing any messages. The device is running the latest firmware and I have tried a factory reset to see if it resolves the issue however it is still not working.Netgear MR7400 (M7 Pro) hotspot + Intel BE201 WiFi card
I’m having a strange compatibility issue with a Netgear MR7400 (M7 Pro)-unlocked hotspot and a Windows laptop with an Intel BE201 Wi-Fi 7 card. The laptop can see the 5 GHz and 6 GHz networks but gets stuck on “connecting” forever, while phones connect instantly at full speed. I reinstalled Windows, updated drivers, and even replaced both the Wi-Fi card and the hotspot — same result. Interestingly, another laptop with an Intel AX211 (Wi-Fi 6E) can connect to the 5 GHz band, so it seems newer Wi-Fi 7 adapters are stricter about the hotspot’s security handshake and refuse to finish connecting. Looking for suggestions on how to resolve this issue. Thanks.Some game scripts won’t load through my netgear router — dns or firewall issue?
Hey everyone, I’m hoping someone here can help me figure out a strange network issue. I’ve noticed that some gaming-related websites and scripts don’t load properly when I’m on my home netgear router, but they work fine when I switch to mobile data. One example is when I try to access delta executor scripts through a site. Sometimes the page only half loads, and other times the scripts just never finish downloading. I’ve already tried rebooting the router and disabling basic security features, but it still happens. That makes me wonder if something like DNS filtering, firewall rules, or content protection on the router is blocking certain script files. Has anyone else run into this kind of thing with netgear routers? Are there specific settings I should check to make sure legitimate game-related scripts and sites aren’t being blocked by mistake? Would really appreciate any advice.The M7 Pro device is unable to connect to the 5G network with the STC provider 2
My M7 Pro is unable to connect to 5G with STC service provider and only works on 4G in Saudi Arabia. We need a solution to this problem. We have contacted support and they have indicated that the issue is a technical problem with Netgear. The problem existed in the M6 Pro and was resolved; we need a solution for the M7 Pro. Model: M7 pro (#MR7400) Firmware Version: NTGX75_10.04. 14.00 Software Version: MR7400-111EUS_00.08 Hardware Version: 10 PRI Version: 00.08 We need a solution JohnPengI solved the WIFI name problem with a factory reset
Hello, I have the same problem, I solved the WIFI name problem with a factory reset. But now I want to change the encryption to WP3 and the problem is the same, the "apply" button is disabled. Also I cannot use my standard mobile PW for all my mobile router, because of a special key inside of it. How could that be fixed on the M3?LM1200-111NAS firmware
Hello, How can I get a firmware update for the LM1200-111NAS? Attempting to check for firmware update via the admin page gives: Update Error There was a problem updating your device. Please try again later. Attempting to install via file with firmware downloaded from the support site, https://www.downloads.netgear.com/files/GDC/LM1200/LM1200_20.06.09.00_LTE_upgrade_package(US).zip indicates that the firmware is not compatible with the device. Thanks.LM200 Cannot Update Firmware
I recently got an LM200 from Amazon. It connects to LTE and works in bridge and router mode fine. I am trying to update it to the latest FW version to get the WAN failover feature. It isn't able to check for firmware updates online, and when I try to upload the firmware manually, it fails and says "Invalid update file. The package is not supported." Does anyone know why this is happening? I've tried the firmware from https://kb.netgear.com/000064616/LM1200-LTE-Upgrade-Package-Retail-Australia-Europe-and-US and from https://www.netgear.com/support/product/lm1200. Firmware Version:EC25AFFDR07A09M4G App Version:NTG9X07C_20.04.07.06 Web App Version:LM1200-HDATA_03.03.103.189 Hardware Version:1.0 Thank you in advance! (also, there wasn't a LM200 tag but I was forced to pick a tag for this post, sorry if that messes stuff up)
