NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
The router config page shows "ERROR Not Connected" in the "Internet"
I'm having the same problem with my RBR350 and RBS350 combo. The router config page shows "ERROR Not Connected" in the "Internet" box but everything is connecting to internet with absolutely no problem at all. Even the router itself can sync time and check for firmware update from the internet. Mine is also in AP mode with DHCP service off. I think this is a very mindless and easy to spot bug that they never bothered to fix since it probably only shows up in the router config page. The "Internet" section in the settings is greyed out when the router is in AP mode, so the firmware is probably blocking itself from starting the process to check for internet connection.Orbi RBR350 + 2 satellites internet speed question
Hi! I use a RBR350 Orbi connected to 2 RBS350 satellites in my house with 2 floors. There is a big concrete wall in the middle of the house. So basically, the router and the RBR350 are downstairs, on one side of the wall. Internet speed is around 500Mb/s there. Me and my partner are working on the 2nd floor, on two separate rooms. The best configuration I found is the following: First satellite is on my desk, on the same side of the wall as the router and Orbi, but 2 floors above. I get around 180 Mb/s with my Macbook Pro M1 Max with an ethernet cable. A little less in WiFi. Second satellite is on my partner's desk, on the same floor but on the other side of the wall, so I use the first satellite as a bridge to the second one. On her cheaper Asus laptop, she gets around 90 Mbs/s with ethernet. My question is: will I be able to gain some speed at the second floor with another Orbi system? I can't have ethernet cables directly from the router ATM. Thanks in advance. Cheers! Max2.4 ghz connection issues
I have Xfinity internet with a NETGEAR Nighthawk CM3000 modem and a NETGEAR Orbi AX3000 router(RBK653). The internet is great we receive 6 ghz connection on wifi throughout the house; but, I recently purchased the Kohler Moxie wifi showerhead and speaker and have been unable to connect it to my home internet. Speaking with Kohler it appears the system requires a 2.4 ghz connection. I utilized the Orbi app to to change my Iot connection to solely a 2.4 ghz connection and not the 2.4 and 5 ghz but the speaker still can't connect to the home wifi. When I connect my phone to the Iot connection it still shows I have a 6 ghz connection to the system. Any suggestions?Sonos and Chromecast wGTV connecting to 2.4g
Hi, I've read reams of similar problems but no solutions seem to work / fit. I have an Orbi RBR350 V4.20.0.4_3.100.71. Currently 3 laptops, 3 phones, a cat feeder, a Sonos One Gen 2 and a Chromecast with Google TV connected. The Chromecast and the Sonos both insist on connecting to 2.4GHz, phones and laptops are on 5GHz. This means I can't cast from phone or laptop to these media pllaers as the phone etc can't "see" them. I have turned 2.4GHz down to 25%, doesn't appear to be an option to turn it off, and ideally I would prefer not to as the cat feeder is 2.4 only. The Ccwgtv is less than 1 metre from the Orbi, the Sonos is across the room, approx 4m in line of sight. Any ideas how to force these two devices onto 5GHz/. ThanksShare your Orbi 350, 750, 850 or 960 series system UpTime
Found on the routers and RBS IP address/debug.htm web page for best details, please post both RBR and RBS uptime. Please note of any inconsistencies between the RBR and RBS. Generally the RBR and RBS uptime should be same. Home wide power brown outs should be noted if these are seen. Thank you.Déconnexions aléatoire (réseau qui se déconnecte/refait une topographie) - Orbi RBK 350
bonjour, depuis des mois j'ai des problèmes avec mon réseau Mesh RBK 350. plusieurs fois par jour, je perds toute connexion (alors que la connexion internet de la box fonctionne toujours sans aucun problème). Et quand la connexion reviens, souvent la topographie a changée! Tests déjà effectués: -mise à jour des satellites et du routeur -routeur déjà en mode AP -désactiver la journalisation -2.4Ghz et 5GHhz à 50% d'émission wifi -IP fixe pour tout: routeur, satellites, périphériques connectés fixes -Reset du routeur et des satellites Il semble que le routeur veuille faire une optimisation plusieurs fois par jour... Des fois la configuration est centralisée (tous les routeurs connectés au routeur), des fois elle est en "daisy" comme dit dans plusieurs posts. Et impossible de la figer ou de désactiver "l'optimisation" (alors que quelle que soit la configuration, quand ça n'essaie pas "d'optimiser" ça fonctionne!!!!!).... c'est du sabotage à ce stade!!!!! Par pitié, mettez une option pour figer la configuration!!! Là c'est insupportable!! J'ai appelé Netgear, ils me demandent de reset la configuration ou d'acheter une extension de support?! Alors que si le software fonctionnait il n'y aurait pas de problème! Merci d'avance de votre aide.
